Walk In Constant Humidity Heat Test Chamber For Testing Solar Panel IEC60068-2
Brand Name:Sinuo
Certification:Calibration Certificate(cost additional )
Model Number:SN886-4300
Minimum Order Quantity:1 Set
Delivery Time:30 days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
Walk In Constant Humidity Heat Test Chamber For Testing Solar Panel IEC60068-2
Product Information For Walk-In Corrosion Humidity-Heat Test Chamber:
Solar panel walk-in constant temperature and humidity test chamber is mainly designed and manufactured according to standards of IEC 60068-2-78, IEC 1251:1993, IEC 61730 and etc. It is used to test photovoltaic modules and determine the ability of modules to withstand long-term moisture penetration. The purpose is to determine the ability of modules to resist heat cycles and humidity-heat tests. It is also suitable for ESS high and low temperature cyclic stress screening test or constant test for electrical and electronic products and other products, parts and materials, and for quality and reliability testing of products, parts and materials under simulated temperature changes.
The test room adopts PLC intelligent central integrated control, touch screen display and operation, it is equipped with sample placement brackets, and a slope at the entrance of the test room. The samples are convenient to be moved and placed. The whole system is simple to operate, and the whole machine is beautiful and generous.
Technical Parameter For Walk-In Corrosion Humidity-Heat Test Chamber:
| Item | Specifications | |||
| Name | Solar Panel Walk-in Constant Temperature and Humidity Test Chamber | |||
| Model | SN886-4300 | |||
| Working studio size (mm) | 1100×2600×1500 W*D*H | |||
| Numbers of samples that can be placed | 3 pcs, Sample size not larger than 1200× 2400×45 mm W*D*H | |||
| Chamber external size(mm) | Approx. 1850×2850×2720 W*D*H | |||
| Test Range | Temperature | -40℃～+100℃ | ||
| Humidity | 20%～98%RH (Shown as following) | |||
| Heating and cooling rate | Rising rate | ≤1.6℃/min (full average) | ||
| Cooling rate | ≤1.0℃/min (full average) | |||
| Temperature fluctuation | ≤±0.5℃ (at steady state) | |||
| Temperature uniformity | ≤2℃ (at steady state) | |||
| Temperature deviation | ±2.0℃ | |||
| Humidity Deviation | ≤+2/-3%R.H. (when the humidity>75%R.H.) ≤±5%R.H. (when the humidity>≤75%R.H.) | |||
| Test contents | 1. Thermal cycle: cycle from -40°C±2.0°C to 85°C±2.0°C, the temperature change rate is less than 100°C/h, the constant temperature time is at least 10min, and one cycle does not exceed 6h | |||
| 2. Humidity-heat test: 85°C±2.0°C, 85%±5%, test time 1000h | ||||
| Noise | ≤75dB | |||
| Weight | Approx. 1800KG | |||
| Test method applied | IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT” IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT” IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT” IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT” | |||
| Note: The above performance indicators are measured at room temperature +25°C without samples. | ||||
| Material | Inner wall material | SUS304# stainless steel plate | ||
| Outer wall material | Cold rolled steel plate, pickling and phosphating advanced powder baking paint | |||
| Insulation material | rigid polyurethane foam + glass fiber | |||
| Structure | Air duct parts | Centrifugal fan; the air outlet can adjust the air volume, height and return air volume | ||
| Door | Single open door, with handle-type non-reaction handle, the door is equipped with an observation window, lighting lamp, window/door frame anti-condensation electric heating device, Door size: SN886-4300: (approx.) 1.1*1.5M, SN886-5800 (approx.) 1.5*1.5M | |||
| Observation window | The door with one conductive film explosion-proof tempered glass observation window (with anti-condensation function), window size: 500W×600H (mm) | |||
| Fan | Long axis centrifugal fan | |||
| Sample mounting rack | Will be customized to match client’s sample | |||
| Impeller | Use stainless steel impeller imported from Taiwan | |||
| Heater | Nickel-chromium alloy electric heater | |||
| Refrigeration Compressor | French Tecumseh compressor | |||
Evaporator | Fin type evaporator | |||
| Refrigerating method | Mechanical compressor cascade | |||
| Cooling method | Air-cooling | |||
| Temperature control instrument | 10-inch smart LCD touch programmable controller | |||
| Lead hole | Φ100mm, 1 pc, equipped with a special foam rubber plug (located on the left side of the chamber) | |||
System Principle For Walk-In Salt Spray Corrosion Humidity-Heat Test Chamber:
The PLC is used to control the cooling of the compressor, the heating of the heat pipe and the humidification of the humidifier, cooperating with the indoor air duct to realize the control of the temperature and humidity in the chamber.
Forced circulation ventilation, balance temperature regulation method. The control system controls the output of the heater through the PID automatic calculation output according to the temperature point set by the system, and finally reaches a dynamic balance.
Chamber structure For Walk-In Corrosion Humidity-Heat Test Chamber:
The test chamber consists of a control cabinet, a chamber body, a sample mounting bracket and a slope.
Walk In Constant Humidity Heat Test Chamber For Testing Solar Panel IEC60068-2
Inquiry Cart
0