BS EN 12983-1 Scratch Resistance Tester For Test Scratch Resistance Of Cooker Coating
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1606
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:L/C, T/T, L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
BS EN 12983-1 Scratch Resistance Tester For Used To Test The Scratch Resistance Of Cookers
Applied standards:
BS EN 12983-1 clause 8.4.2, 8.4.3 and Appendix K.
Purpose, principle and structure of apparatus:
The device uses the pencil nib to compare the scratch resistance of the coating; Apply 4&8N pressure to the pencil; Insert the pen core into the hole where the hole is 45°, then the pencil nib completely touches the bottom coating of the pot, and then draw a 2~5cm line on the coating; Judge the effect by the lines drawn.
Main specifications:
1. Power supply: AC220V, 50HZ
2. Test station: 1
3. Drive mode: electric + eccentric wheel mechanism
4. Test speed: 0-10 times/min, adjustable
5. Scratch length: 20~50mm, adjustable,default 25mm
6. Scratch angle:45 °
7. Test mass: one of each 4N, 8N;
8. Pencil: one of each HB,2H,3H,4H,5H.
9. Overall dimension:WDH=900×500×700mm, Maximum allowable sample Ф400mm.
10. Heating platform DB-2EFS:
| Graphite heating plate | |||||
| Product model | DB-XEFS | DB-1EFS | DB-2EFS | DB-3EFS | |
| Power supply/power | AC220V/50Hz | ||||
| The whole machine power | 1.6KW | 2KW | 3KW | 4KW | |
| Display mode | LCD display | ||||
| Operating temperature | 50-420℃ | ||||
| Temperature control precision of instrument | ±1℃ | ||||
| Temperature uniformity | 3% | ||||
| Heat the size | 300*200mm | 400*280mm | 450*350mm | 600*400mm | |
| The plate material | graphite | ||||
| The plate thickness | 12mm | ||||
| bearing | 5kg | ||||
| The net weight | 9kg | 13kg | 18kg | 30kg | |
| Product size | 30*35*20cm | 40*43*20cm | 45*50*20cm | 60*55*20cm | |
Operations steps:
1 Put the heating platform on the equipment, and power on it by
inset it’s plug to the socket on the equipment.
2 Put the sample cookware on the heating platform.
3 Put the sharpened pencil into the fixture with an included angle
of 45°, with the sharpened end facing the surface of the cookware,
and tighten the screw to fix the pencil.
4 Select the load according to the requirements, 4N is shown in the
left figure below, and a load accessory is added to make 8N.
5 Power on the equipment, select the test according to your requirements.
Ambient temperature test: Test at room temperature, select 8N load;
High temperature test: Turn on the power of the heating platform to start heating, set the temperature of the heating platform (standard requirement is 200℃), and select 4N load.
Note: During the high temperature test, when the temperature display of the heating platform reaches the set value, press the start button to start scraping, and observe whether the speedometer under the panel is the speed required for the test. If not, you can adjust the speed controller on the panel.
6 Set test times.
7 After the test is completed, check whether the cookware meets the requirements according to the standard.
Maintenance:
1 Before working, please check whether the fasteners are loose, and make sure that the loose fasteners are locked.
2 Do not touch the surface of the heating platform when heating to prevent burns.
3 Please remove the weight when it is not working.
4 Please cut off the power when not working.
BS EN 12983-1 Scratch Resistance Tester For Test Scratch Resistance Of Cooker Coating
Inquiry Cart
0