IEC 60335-1 Clause 8.1.2 Short Test Probe 13 For Hazardous Live Parts Test
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2210-9
Minimum Order Quantity:1
Delivery Time:3 Days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 60335-1 Clause 8.1.2 Short Test Probe 13 For Hazardous Live
Parts Test
Product Overview:
This probe conforms to the standard requirements of IEC 61032 figure 9 test probe 13, IEC60950 figure 2B, IEC 60335-1 clause 8.1.2, etc. This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment.
Probe Dimension:
| Metal pin tip diameter (mm) | Ф3 0 -0.05 |
| Metal pin tail diameter (mm) | Ф4 0 -0.05 |
| Metal pin length (mm) | 15 0 -0.1 |
| Guard diameter (mm) | Ф25±0.2 |
| Guard thickness (mm) | 4 |
| Handle diameter (mm) | Ф10 |
| Handle length (mm) | 20 |
Standard Figure:
Operation:
Please refer to the relevant standards.
Take IEC 60335-1 clause 8.1.2 as an example:
Test probe 13 of IEC 61032 is applied without appreciable force through openings in class 0 appliances, class II appliances and class II constructions, except for those giving access to lamp caps and live parts in socket-outlets.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:
IEC 60335-1 Clause 8.1.2 Short Test Probe 13 For Hazardous Live Parts Test
Inquiry Cart
0