IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2801
Minimum Order Quantity:1
Delivery Time:20 Days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
Product Information:
This electrical hammer durability impact test equipment conforms to IEC 60745-2-1 clause 17 and IEC 60745-2-6 clause 17 and figure 103.
This apparatus is applicable to durability test for hand held motor operated
electric tools such as electric hammers, Electric drills and impact drills, which power no more than 2.5KW, to check whether electrical or mechanical hazard appears during the normal use of the electric hammer or drill.
Technical Parameters:
| No. | Item | Specifications |
| 1 | Power supply | 220V/50Hz |
| 2 | Air source | 5~8 bar |
| 3 | Electrical control | PLC and 7 Inch Touch screen |
| 4 | Load voltage | 0-250V adjustable, current display |
| 5 | No-load rotation angle | 0°,90°,180°, can manual control clockwise or counter clockwise |
| 6 | No-load rotation rate | 0-360°/s, preset |
| 7 | Power on time | 0-999.9s, preset |
| 8 | Power off time | 0-999.9s, preset |
| 9 | Test time | 0-9999h, preset |
| 10 | Total test time | 0-9999h, preset |
| 11 | Interval time | 0-9999min, preset |
| 12 | Load pressure | 100,125,150,175,200,250,300,350,400N preset |
| 13 | Impact head | 0.7,1.4,2.3,3.4kg (include the connect handle), use according to table 101 |
| 14 | Steel ball | Φ38mm |
| 15 | Steel plate | 100,140,180,220mm, use according to table 101 |
| 16 | Rubber plate | A set of 4, Matching with steel plate and steel base |
| 17 | Steel base | base weight 90kg, equipped with 9 pcs 30kg weights |
| 18 | Equipment dimension | Control cabinet 600mm*400mm*750mm, aprox. 100kgs Test rack 400mm*400mm*2000mm, aprox. 450kgs |
Equipment Structure
A. Electric control cabinet containing PLC, 7 Inch Touch screen,
control panel, load (voltage 0-250V adjustable, voltage and current
display);
B. Mechanical device as shown in Figure 103, containing 360
kilograms of steel base, including the impact head, steel plate and
fixture.
Test Functions:
1. No load test: All hammers, including hammers with drill only mode, are mounted vertically in a test apparatus as shown in Figure 103 and are operated at 1.1 times rated voltage for 12h, then operated at 0.9 times rated voltage for 12h. Each cycle comprising a period of operation of 30s and a rest period of 90s during which the tool remains switched off. During test, on each test voltage, hammer placed in three different directions (horizontal, vertical, vertical), each position of the tool running time of about 4 hours.
2. Load test: All hammers, including hammers with drill only mode, are mounted vertically in a test apparatus as shown in Figure 103 and are operated at rated voltage or at the mean value of the rated voltage range, for four periods of 6h each, the interval between these periods being at least 30 min.
During these tests, hammers are operated intermittently, each cycle comprising a period of operation of 30s and a rest period of 90s during which the tool remains switched off.
During the tests, an axial force to ensure steady operation of the impact mechanism is applied to the hammer through a resilient medium.
If the temperature rise of any part of the tool exceeds the
temperature rise determined during the test of 12.1, forced cooling
or rest periods are applied, the rest period being excluded from
the specified operating time.
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
Inquiry Cart
0