IEC 60669-1 Clause 12.2.5 Figure 9 Conductor Damage Degree Test Machine
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2111
Minimum Order Quantity:1
Delivery Time:30 Days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 60669-1 Clause 12.2.5 Figure 9 Conductor Damage Degree Test Machine
Product Information:
The conductor damage degree test machine is designed and manufactured according to the standard requirements of IEC 60669-1:2017 clause 12.2.5 &12.3.10 figure 9, IEC 60884-1:2013 clause 12.2.5 figure 11, UL486A-B, etc.
This device is use to check whether the terminals with screw and screwless terminals can bears the mechanism force under normal operation. Mainly use to judge whether the design and structure of screw clamping terminals meet the requirement of clamp the conductors without excessive damage. Adopt the structure of guide rail. Can preset test times, while testing, tester will automatically stop when preset test times completed, and output sound alarm signal.
Technical Parameters:
| Applied standard | IEC 60669-1 |
| Applied clause | 12.2.5, figure 9 |
| Test sample | Terminals, connectors |
| Test rate | 10±2 RPM |
| Diameter of gyration | 75mm (and 76mm for UL standard) |
| Test times | 0～9999 |
| Weights | 0.3, 0.4, 0.7, 0.9, 1.4, 2kg |
| Test height | 260, 280, 300, 320mm |
| Diameter of ferrule hole | 6.5, 9.5, 13, 14.5mm |
| Power supply | AC220V±10%, 50Hz |
IEC 60669-1 Clause 12.2.5 Figure 9 Conductor Damage Degree Test Machine
Inquiry Cart
0