IEC 62368-1 Annex T10 Centre Punch For Glass Fragmantation Test
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN2210-28
Minimum Order Quantity:1
Delivery Time:3~5 Days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 62368-1 Annex T10 Centre Punch for Glass Fragmantation Test
Product Information:
The Centre Punch conforms to the standard requirements of IEC 62368-1:2018 Annex T10, IEC 60598-2-3 clause3.6.5, IEC 60335-2-6:22.120, IEC 60335-2-25:22.119; IEC 60335-2-89:22.104 and etc.
It is used to test accessible glass panels of household appliances, electrical accessories, lamps, etc.
The test sample is supported over its whole area and precautions shall be taken to ensure that particles will not be scattered upon fragmentation.
Technical Parameters:
| Applied standard | IEC 62368-1 |
| Applied clause | Annex T10 |
| Mass | 75g ± 5g |
| Tip angle | 60 ° ± 2 ° |
| Tip shape | Conical |
| Material | Tungsten carbide |
Test Process:
The sample under test is broken by means of a test punch having a
head with a mass of 75 g ±5 g and a conical tungsten carbide tip
with an angle of 60°±2°. The punch shall be positioned
approximately 13 mm in from the longest edge of the glass at the
midpoint of that edge. The punch is them hit by a hammer so that
the glass breaks.
IEC 62368-1 Annex T10 Centre Punch For Glass Fragmantation Test
Inquiry Cart
0