1.2/50 μs Transient Voltages Test Generator Electrical Appliance Testing Equipment
Brand Name:Sinuo
Certification:Calibration Certificate (Cost Additional)
Model Number:SN1104
Minimum Order Quantity:1
Delivery Time:20 Days
Payment Terms:L/C, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China
Supplier`s last login times:
within 36 hours
Product Details
Company Profile
Product Details
IEC 60335-1 12.5kV 1.2/50 μs Transient Voltages Test Generator
Product information:
This impulse voltage test generator is required by IEC60335-1 clause 14, IEC60065:2014 clause 10.2, 13.3.4 a), and IEC 60065:2014 clause 13.3.4 b), 14.2, IEC60950, and etc.
It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance of household appliance, Audio, video and similar electronic apparatus.
This impulse voltage test generator is a standard lightning wave test device with waveform 1.2/50µs. Wavefront time is 1.2µs, wave after time is 50µs, it is a destructive tester. The sample breakdown will produce a spark and acoustic, instrument peak voltage than the no-load voltage is decreased substantially (close to zero), when applying the same voltage in the next test, it will also show the above phenomenon.
Technical Parameters:
| Model | SN1104 |
| DC high voltage | Max. 12.5kV |
| Impulse voltage wave | Impulse wavefront time: 1.2 µs ± 30 %; Half value of after wave time: 50 µs ± 20 % |
| Instrument internal resistance | 12Ω ± 10% |
| Internal resistance converter box | 500Ω - 10% optional |
| Peak voltage: 300 V~ 12,500V | 0-12500V Low: 300 V~ 2,500V; High: 2,500 V~ 12,500V |
| Impact interval time | 5 ~ 99s |
| Impact cycles | 1 ~ 9999 |
| Polarity | Positive and negative |
| Working power source | Match client's local power supply grid |
| Dimension | 630mm×600mm×380mm |
| Weight | 30 KG |
Circuit principle:
Output waveform definition
Voltage wave
Voltage wave
Impulse wavefront time: T1=1.67T=1.2 µs ± 30 %;
Half value of after wave time: T2=50 µs ± 20 %
Note: the waveform will be shown by an external oscilloscope
(oscilloscope should be prepared by user)
Sample connection:
As shown in the picture below, connect the red and black wires of
the junction box to the equipment respectively, and connect the
positive and negative poles of the sample to the terminals of the
junction box.
1.2/50 μs Transient Voltages Test Generator Electrical Appliance Testing Equipment
Inquiry Cart
0