IPX9 IPX9K Water Ingress Testing Equipment / High Pressure And Temperature 80±5°C Water Jetting Test Chamber

IEC 60529 IPX9 IPX9K High Pressure High Temperature Waterproof Test Equipment

Overview:

The high pressure and high temperature testing chamber is used to verify the protective performance of the Passenger vechiles, buses, lamps, motorcycles and other parts and components under high pressure and temperature water jetting at degree IPX9 (IPX9K)..

This equipment is designed and manufactured according to:

IEC 60598-1-2017 “Luminaries-Part1: General requirements and tests”

IEC 60529 -2013 “Degrees of protection provided by enclosure (IP code)” IPX9

ISO20653-2013 “Road vehicles-Degrees of protection (IP code)-Protection of electrical equipment against foreign objects, water and access” figure 7, 8, 9 and table 7 (9K) ”

DIN40050-9 “Road vehicles-Degrees of protection (IP code)-Protection against foreign objects,water and access Electrical equipment>figure 8and table 8 (9K) ”

Structure Features:

The device is composed of a chassis, a water spray mechanism, a high-pressure high-temperature device, a turntable and an electrical control cabinet.

1. The outer casing of the chamber is made of high-quality steel plate. The inner chamber and the turntable are all made of SUS304 stainless steel to ensure waterproof and anti-corrosion. The test chamber has its own water circulating system, and has a water collecting device inside. The test water is automatically collected into the water storage tank through the chassis. The water inlet can be automatically controlled through the float valve in the water tank, the system can give out high and low water level alarm detection alarms, which can effectively prevent the pump from being damaged due to dry water shortage.

2. 4 standard nozzles are installed in the 0°, 30°, 60°, 90° position of the ring bracket.

Jet Schematic Diagram

3. The built-in water heating thermostat device ensures that the test water temperature meets the standard requirements. The high-pressure water is supplied by the high-pressure water pump through the frequency conversion, and the water jetting flow can be preset on the touch screen.

High Temperature and High Pressure Water Pump (Imported from Italy)

4. The test chamber is equipped with a turntable, the turntable is caused to rotating by motor driving at a rotation speed of 1r/min, to make the enclosure is sprayed from all practicable directions.

5. The water heating, constant temperature, water pressure, water flow, water spray time, cycle program process and the turntable rotation action are controlled by the electrical control cabinet.

Technical Parameters:

Sinuo is an innovation manufacturing company, specializing in the research and development and sales of laboratory construction and testing equipment for electrical appliances (covering the construction of energy efficiency and performance laboratories, as well as supplementary waterproof testing laboratories, materials flame-retardant laboratories, basic general testing equipment, etc.), Sinuo aims to provide clients with complete laboratory construction, system integration, R&D, rectification and after-sales service, and strive to be the leader of one-stop service for laboratory construction in the field of electrical appliance testing.

Sinuo products are composed of all kinds of testing equipments as per standards of IEC/ BS/ EN/VDE/UL/ ISO..., such as household appliances testing equipment, energy efficient testing laboratories and comprehensive performance test system for household appliances, battery testing equipment, automotive testing equipment, luminaries testing equipment,IP code testing equipment, environmental test chamber, flammability test chambers, EMC testing equipment and etc.

Sinuo employees include a highly trained staff of engineers for sales and service, that are committed to offer satisfactory products and prompt service to all home and abroad customers.

Sinuo cooperate with many research institutions and schools to enable our techincal capacities. Sinuo has two own factories, one is in Guangzhou, the other is in Dongguan, and authorized agents and representative offices in Korea, South Africa, Egypt,Pakistan and Philippines.

Sinuo combines all the R/D and production advantages, contributes to provide perfect, high-end and systematic electrical appliance testing laboratory solutions, products and services for corporate customers, universities and third-party laboratories. Our clients include Bureau Veritas, CSA, Intertek, TUV Rehiland, TUV SUD, SGS, etc.