Easy Operate Metal Roof Ridge Cap Roll Forming Machine / Roof Tile Roll Forming Machine

Roofing ridge cap forming machine, ridge cap tile roll forming machine, metal ridge cap panel

Brief Introduction:

There are different roof flashing roll forming machines based on different technical requirements on the final products, however, in the market people most of time use three kinds of roof ridge cap roll forming machines. Roof ridge caps with pressed STEPs, Roof ridge cap without steps, and V shaped roof flashing without STEPs. It has to be pointed out that a roof ridge caps without STEPS sometimes can be used both as roof ridge caps and as roof valley flashings. In addition, there is a similar machine, Glazed Tile Roll Forming Machine.

There are not so many differences between these two kinds of roof ridge cap roll forming machines, except for different roller stations, different rolling tools, and what really makes different is hydraulic Pressing equipment which makes continuous STEPs on roof ridge caps.

Quick Detail:

1. Thickness : 0.4-0.6mm
2. Material : pre-painted steel
3. Input width :457mm
4. Material weight : 3Tons
5. Coil inner diameter : 480mm
6. Driven way: by driven motor
7. Cutting way: no waste cut, stop to press, stop to cut
8. Cutting tolerance : ±1mm

Machine list:

1. 3T*600mm hydraulic & driven un-coiler
2. Roll former
3. Hydraulic cutting device
4. Run out rack
5. PLC control system

Description/Technical Parameter details of complete line:

• 3TX600mm Hydraulic Un-Coiler

Hydraulic system for expansion coil-inner-hole with 4 palms

Link-connect expanding system

Pump power=1.5KW

Frequency Inverter to regulate turning speed: Motor: 2.2KW

Load capacity=3Ton;

Coil Inner – diameter =451-530mm

Coil outer-diameter=Max.1500mm

Coiler Width=Max.600mm

Driving motor to turn the coil

Limit switch for auto stop/start device

• Entry bench and manual pre-shearing device
• Roll forming machine with cutting details as below table :

• PLC Control System

Siemens brand PLC and touch screen, Schneider/ Shihlin/ Delta brand Inverter, Omron encoder

Cut-to-length tolerance≤±1mm

Control Voltage 24V

• Product Rack Un-powered, 3 units

Profile Drawing/Layout/Equipment reference pictures:

NKH Machinery is an experienced manufacturer of a wide range of roll forming machines, such as panel/roofing tile /purlin /ridge cap /pipe/ metal deck lines/cut to length & recoiling lines/ crimping/curving machines/folding machines, etc.

Over 10 years of experience has allowed us to become aware of and to incorporate the best practices from around the World. It has allowed us to develop our company’s awareness of the importance of design, performance and quality standards in all aspect of the development and delivery of modern roll forming lines.

Excellence is our expectation. A consistent commitment to quality is something we maintain throughout every level of our organization and every individual within it. Whether working in parts or assembly, service or sales, each member of the NKH machinery team participates in the development process of each machine we create. We will meet your high standards by taking full advantage of the experience, creativity, and wisdom each member of our team has to offer. Our overall goal is to ensure the best possible outcome for you, assisting you in generating profits that are well-worth your investment with a NKH Machine.

We are ready to meet you anywhere in the world to discuss your roll forming requirements and you are welcomed to call Our Sales Team to take your initial enquiry.