AY13EU 32 Point 2AMP 24VAC Output Relay 32K Bytes

Mitsubishi AY13EU OUTPUT RELAY 32POINT 2AMP 24VAC/DC NEW

Description:

• AY13EU
• DISCONTINUED BY MANUFACTURER
• OUTPUT RELAY
• 32POINT
• 2AMP
• 24VAC/DC

QnA/ACPU bus connection.
2 joint.
Applicable models: A985 (-V) /975/970/960/956 (W) GOT. SRAM capacity: 32K bytes.
AD59 (-S1) data storage.
On-line debugging is the process that will through the simulation debugging to further carry on the on-line unification to adjust.
On-line debugging process should be step by step,
From MITSUBISHI PLC only connected to the input device, and then connect the output device, and then connect to the actual load and so on and so on step by step AY11EU.
If you do not meet the requirements, the hardware and procedures for adjustment AY13EU.
Usually only need to modify the part of the program can be
Output points: 32 points.
Voltage: DC24V/AC240V, 2A/1 point, 5A/1 public end.
Output type: relay output.
Response time: 12ms.
8 point /1 a public side AY13EU.
38 point terminal station.
With the surge absorber.
CE certification.
The number of I/O thyristor DC motor control required tube DC motor speed control system is the main form of DC speed regulation,
The thyristor rectifier unit is used to supply power to the DC motor MITSUBISHI AY13EU.
PLC control of the DC drive system, the input of the PLC in addition to the main signal outside the signal,
We need to consider the switching signal, the fault signal transmission device, brake signal and fan fault signal.
The output of the PLC mainly consider the speed command signal positive 1~3 level, 1~3 level, allowing reverse switching signal and brake open signal etc MITSUBISHI AY13EU..
In general, a reversible DC drive system controlled by PLC is approximately 12 input points and 8 output points,
An irreversible DC drive system requires 9 inputs and 6 output points.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian MITSUBISHI AY13EU.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
Control solenoid valve required I/O points by the action principle of the solenoid valve can be known,
A single coil solenoid valve with PLC control to 2 input and 1 output,
A double coil solenoid valve requires 3 inputs and 2 outputs,
A buttonn needs an input; a light sensitive switch needs 4 or 2 inputs,
A signal lamp needs 1 output, band switch,
Several bands are required for several inputs,
In general, a variety of position switches are required to take up 2 input points AY13EU.

Features:

A programmable logic controller, PLC, or controller is a digital computer used for the automation of typical industrial electromechanical processes, such as mechanical control of factory assembly lines, amusement devices or lamps. PLC is designed for multiple layouts of digital and analog input and output, extended temperature range, resistance to electrical noise, vibration and shock. An example of a "hard" real-time system, because the output result must be produced in a limited continuous response to the input conditions, otherwise it will cause unexpected operation

The main difference from other computers is that PLCs are armored under harsh conditions (such as dust, humidity, heat, and cold) and have a wide range of input/output (I/O) facility arrangements. These connect PLCs to sensors and Actuator. PLCs read the position of limit switches, analog process variables (such as temperature and pressure), and complex positioning systems. Some use machine vision. On the actuator side, PLCs operate motors, pneumatic or hydraulic cylinders, magnetic relays, solenoids or analog outputs. The input/output device can be built into a simple PLC, or the PLC can have external I/O modules connected to a computer network plugged into the PLC.

What is a PLC system?

CPU module
Power module
One or more I/O modules Digital I/O modules
Analog I/O module
Communication interface module

Type plc

An integrated or compact PLC
Modular PLC
Small PLC
Medium PLC
Large PLC

FX1N Series Programmable Logic Controllers

Product introduction

MORE INFORMATION

DELIVERY

Logistic partners UPS, FedEx and DHL

International delivery available

Same day dispatch from group stock

WARRANTY

All parts new are covered by Shenzhen Viyork 12 month warranty

RETURNS

No hassle returns policy

Dedicated customer support team

PAYMENT

Trade credit

We understand that credit is a necessary part of business and offer credit agreements on request, subject to status.

Payment options

We accept Bank transfers and the following methods of payment:

Western Union PayPal VISA

Pls contact us:
Company: Shenzhen Viyork Technology CO.,LTD.
Cotact:Miss Liu
Moblie/WhatsApp: 0086-13826534820
Email: shenzhenviyork@163.com
Skype:live:.cid.ba9401e01ca235c2

Shenzhen Viyork technology co., LTD. engage in professionally sales industrial automation (DCS, PLC, Redundant fault-tolerant control system,Robotic system) spare parts.

We can offer these advantage products: Mitsubishi, Yaskawa,Pansonic, Ovation, Emerson,Honeywell,Allen - Bradley, Schneider, Siemens, ABB, GE Fanuc, Rosemount and Yokogawa transmitter and so on.

The efforts of all the employees in the company and the support of the customers and the same profession,Our business rapidly expand throughout China and around the world, quickly became the industrial automation rising star, here, thanks to the customers long-term support, We will focus more for your attention.

Our advantage produts:

And so no....

Any inquiries,pls let me know.

I will give you the best price.