Heat Pump Low Temperature Dehumidifier
Product Features
Developed this model to based on the low dew point dehumidification
and to simulate the physical characteristics of the northwest wind
in the north of the winter.The air is dehumidified by the two
stages of the machine to form a cold and dry wind with low
temperature and low humidity. can maximize keeps the materials'
original shape, primary color and original flavor during drying
processing.Especially suitable for the heat-sensitive
materials,such as most of the aquatic products, Chinese herbal
medicines which need low temperature and slow drying . The drying
effect is excellent .
This Series heat pump low-temperature dehumidifier mainly provides
heat, cooling and dehumidification for the drying room. The drying
room's inside humid hot air will be send to the units return air
pipe and flow into the unit through the negative pressure
circulating fan; Through the high temperature side of the heat
exchanger , First time to lower the air temperature and to increase
the relative humidity rate for the unit cubic water; Then the air
temperature will be lowered in Second time through the surface
cooler. At that time, the relative humidity rate of the air already
close to its own dew point temperature. Then Pass the evaporator to
lower the temperature thirdly and To realize condensation and
dehumidification after dehumidification,The moisture will be
discharged from the water tank and drain pipe which are on the
bottom of the evaporator.At this time, the circulating air becomes
into a kind of lowtemperature drying type cold air because of the
condensation and the Relative humidity is reduced.Pass the air hose
and back to the low temperature side of the Full-effect heat
exchanger.Then the high temperate and lower temperate exchange the
heat.Makes the low-temperature cold air be heated first time and
reduce the air relative humidity Again pass though the condenser.To
increase the air temperature and reduce the air relative humidity.
Make it reach the temperature for dryer room use and form into the
hot dryed air .Then be extracted by the Centrifugal fan and send
into the dryer room.
Dried Material Applications
Widly used in dry and extract the cell liquid from the roses,
chrysanthemums, honeysuckle, gardenia, jasmine, American ginseng,
Cistanche and many other chinese herbal medicines
Technical Advantages
- Temperature control: 15-30 °C adjustable;
- Humidity control: 5-99% RH adjustable;
- Dehumidification: In the working condition with temperature 25 ° C
and relative humidity 70%, the average dehumidification is 22KG /
hour;The machine will adjust the Fan's air pressure and air speed
automatically according to the temperature and Humidity.
- Adpot Negative pressure cold -air circulation Drying Mode,with
excellent drying uniformity;
- Closed room low temperature dehumidification.Does not exchange air
with the outside environment,which make sure the drying materials
with stable quality, clean, hygienic, energy saving and
environmental protection in the processing of drying.
Technical Specifications
机组型号Unit Model | 压缩机功率 Compressor Power | 输入功率 Power Input (KW) | 制热功率 Heating Power (KW) | 额定温度 Rated Temperature | 额定电压 Rated Voltage (V) | 额定电流 Rated Ameter (A) | 环境温度 Environmental Temperature(℃) | 工质充注 Working Fluid Charge(KGS) | 噪音分贝 Sound Level (DB) | 外形尺寸 Machine SizeW*L*H(MM) | 重量 Weight (KG) |
GFM-CD-15 | 6HP | 4.5 | 15 | 28/30 | 380 | 8.6 | 5-45 | 4.5 | 55 | 1800x1650x1754 | 450 |
GFM-CD-30 | 12HP | 9 | 30 | 28/30 | 380 | 17.2 | 5-45 | 9 | 55 | 1800x1650x1754 | 600 |
High Temperature Heat Pump System Principle
The high temperature heat pump consists of compressor, condenser,
throttling device and evaporator. The refrigerant absorbs air heat
from the evaporator, transforming from low pressure liquid to
steam, then pressurized into high temperature steam by the
compressor. In the condenser, the refrigerant releases heat and
condenses into high pressure liquid. The throttling device reduces
pressure and temperature, completing the cycle that transfers low
temperature heat to high temperature medium.
Process Display
Company Information
Gofun Company offers comprehensive turnkey solutions for tomato
paste production lines and processing/packaging lines for various
fruits including apple, pear, peach, mango, and apricot. Our
machines have been successfully exported worldwide to Asia, Africa,
South America, Europe, and North America.
We are dedicated to developing exceptional food machinery and
contributing to the global agricultural industry, fostering
mutually beneficial relationships with partners worldwide.
Our Services
- Technical support
- Marketing suggestion
- Final packing suggestion and design
- Factory building and design
- Oversea technical support
- Oversea equipment maintenance
- English speaking engineers available