SS Mass Transfer Metal Structured Column Packing 125Y Use In Petrochemical
Brand Name:Yuanhai
Certification:ISO 9001
Model Number:YH-06
Minimum Order Quantity:5 cubic meters
Delivery Time:5-10days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Address:
East of Huangcheng Village,northeast of Huangcheng Township,anping County
Supplier`s last login times:
within 38 hours
Product Details
Company Profile
Product Details
SS Mass Transfer Metal Structured Column Packing 125Y Used In Petrochemical
Metal Structured Column Packing Introduction
1. Material: carbon steel, stainless steel, Ti, Aluminum foil, etc.
2. Model: from 125X(Y) to 1000X(Y)
3. Type: 15 types——PCC pak packing, wire gauze structured
packing, packing with perforated surface
4. Advantage: high cost performance.
Metal Structured Column Packing Technical Specification
The specification is based on SS304 material:
| Model | void volume | Piece thick | Number per heaping | Weave height | Weave distance | Gear-shape angle | F-factor | Theoretical hetp |
| (%) | (mm) | (kg/m3) | (mm) | (mm) | φ | φ | (Piece/m) | |
| 100Y | 87.5 | 2.5+/-0.5 | 460 | 30 | 50 | 80 | 3.5 | 1 |
| 125Y | 85 | 2.5+/-0.5 | 480 | 23 | 42 | 80 | 3 | 1-1.5 |
| 160Y | 84 | 2.2+/-0.5 | 500 | 17 | 30 | 80 | 2.8 | 1.5-2 |
| 250Y | 82 | 1.4+/-0.5 | 530 | 13 | 22 | 80 | 2.5 | 2-3 |
| 350Y | 80 | 1.2+/-0.5 | 580 | 9 | 15 | 80 | 2 | 3.5-4 |
| 450Y | 76 | 1+/-0.5 | 600 | 6 | 11 | 80 | 1.5-2 | 4-5 |
250(AX), Precision rectification for high productive capacity and less theoretical plate number.
500(BX), Vacuum rectification for thermosensitive system and hard separation system, especially suitable for rectification with pressure lower than 7Kpa.
700(CX), Separation of isotopic compound and isomeric compound.
Metal Structured Packing Material
Structured packing is a range of materials that are specially designed for use in distillation and absorption columns, as well as chemical reactors. They usually consist of thin corrugated metal plates or gauzes, designed to force fluids on complicated paths throughout the column. The design is intended to ultimately produce a large surface area for contact between different phases.
Structured packing is made from a variety of materials including corrugated sheets of perforated embossed metal, plastic, or wire gauze. The resulting product is an open honeycomb with inclined flow channels producing a high surface area coupled with a low gas flow resistance. Enhancements are often chosen to maximize liquid spreading which are ideal for applications with low pressure and irrigation rates.
Metal Structured Column Packing Advantages
- 1. High number of theoretical plates, large flux and low pressure drop;
- 2. Good performance with low working load, increased number of theoretical plates with the decrease of gas load, and there is almost no bottom limit of work load;
- 3. Large operation elasticity;
- 4.No obvious amplification effect
Metal Structured Column Packing Application
Mass transfer of temperature sensitive chemical products
Proper lateral distribution of liquids and gases
Solvent recovery
Batch and continuous distillation
Low liquid loading systems
Providing highest theoretical stages per meter of packing height
Reducing liquid hold up
Economizing operating loads of vessels
Metal Structured Column Packing Show
SS Mass Transfer Metal Structured Column Packing 125Y Use In Petrochemical
Inquiry Cart
0