

Add to Cart
SS 304 Wire Mesh Demister Pad Oil Mist Eliminator Pad For Chemical Tower
Description
Knitted wire mesh demister pad is also known as mist eliminator or
sprays. Knitted wire mesh demister pad is supplied in standard,
high efficiency and high permeability. Demister Pads are
essentially porous blankets of carefully knitted wire mesh designed
and constructed to efficiently abate mist particles. Demister pad
is mainly used to eliminate streams with diameter of more than 3μm
to 5μm.
Knitted wire diameter used for the knitting directly affects flow,
dirt holding capacity, pressure drop and cost. Knitted wire mesh
demister pad is used to separate in the most efficient manner the
very fine drops carried away by a gas or steam, either at a boiling
stage, vacuum evaporation or bubbling of a liquid.
Product Feature
1. Simple structure, lightweight
2. High porosity, less pressure drops.
3. Big surfaces area, high demisting efficiency.
4. Easy installation, operation and maintenance.
5. Long service life.
Product Specification
Type | Specification | Filaments specifications (mm) |
33-30 type | Φ0.08 | |
38-40 type | Φ0.08 | |
20-40 type | Φ0.22 | |
30-40 type | Φ0.10Φ0.12 | |
Shock absorber type | 30-50 type | Φ0.16 |
40-60 type | Φ0.12 | |
30-80 type | Φ0.22 | |
50-120 type | Φ0.22 | |
40-120 type | Φ0.22 | |
Application
In filtration applications, wire diameter of the demister pad is
perhaps the most important design variable. It directly affects
flow, dirt holding capacity, pressure drop and cost. In general,
larger diameter wire allows for higher flow but provides lower dirt
holding capacity. Also, larger diameter wire is less expensive.
Therefore, a balance must be struck between using a higher density
filter of higher cost fine wire or a lesser density filter using
lower cost heavy wire.
Demister pad is widely used in the petroleum ,chemistry,
metallurgy, machine, pharmaceuticals, automobile industry and
environmental protection, for distillating, absorbing, evaporating
and filtering, so as to eliminate the entrainment and foam mixed in
the gas and liquid.
Packaging Detail
Plastic bag then carton or wooden case--
Special packing can be made according to the clkients' request
About our company
1. Is your company a manufacturer or a trading company?
We are a manufacturer located in Anping County, China.
2. Do you have inport-export right?
Yes, we do. Our factory has been certificated as an import-export
enterprise.
3. What is your payment mode?
30% in advance and 70% before delivery by T/T, WESTERN UNION, L/C
or negotiated.
4. How about your packing?
We usually packed in plastic material inside and then wooden box
outside.
5. How long is your delivery?
Usually 10-20 days after order confirmed, according the quantity
ordered.
6. Is it sample available?
Yes, small pieces of sample are available in our company.