Fan Blower Motor Centrifugal Exhaust Fan For Air Handling Unit AHU Centrifugal Blower
Brand Name:CPMDJ
Certification:CCC
Model Number:CPZ12-12
Minimum Order Quantity:100PCS
Delivery Time:15-35 days
Payment Terms:TT, LC
Contact Now
Add to Cart
Active Member
Location:
Changzhou Jiangsu China
Address:
NO.90,HEHUA WEST ROAD, DAIXI, LUOYANG TOWN, WUJIN,CHANGZHOU,JIANGSU,CHINA
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Fan Blower Motor Centrifugal Exhaust Fan For Air Handling Unit AHU Centrifugal Blower
Centrifugal fans can be manufactured to various casing thicknesses and with various forms of construction according to usage. Thus at one extreme they can be handling clean air whilst at the other, air or gas handled can be at a temperature well above ambient and/or may contain substantial quantities of moisture and/or solids. It may also be at high pressure such that loadings on the fan casing and the associated ducting system are much higher than usually expected for a HVAC fan.
Connection to the ducting may be via flexible connections, or alternatively may be directly connected. In the latter case the fan has to withstand additional loads due to the dead weight of these connections. Where gases, or the surrounding ambient atmosphere, are at a high or low temperature, additional loading can result from the effects of expansion or contraction.
Product Features:
| Material: | Housing:Sheet Steel |
| Impeller:Galvanised Sheet Steel | |
| Rotor:Partially cast in aluminium | |
| Direction of rotation: | CW OR CCW,seen on rotor |
| Type of protection: | IP44 |
| Insulation class: | B/F |
| Mode of operation: | S1 |
| Mounting position: | Any |
| Bearing: | Ball bearing (Maintenance) |
- External rotor motor protected through thermal contact
- Balanced statically and dinamically
- Low noise level
- Vibrations free
- Motor connections through both sides of the casing
- Variable speed 0-100% through electronic controller or transformer
Specification:
| Fan model | Motor model | Voltage | Frequency | Speed | Air volume | Current | Capacitor |
| CPZ7-7 | YDK90-6 | 203V-240V | 50/60Hz | 850RPM | 1000m³/h | 0.9A | 5μF |
| YDK200-4 | 203V-240V | 50/60Hz | 1150RPM | 1500m³/h | 1.8A | 10μF | |
| CPZ8-8 | YDK200-6 | 203V-240V | 50/60Hz | 820RPM | 2000m³/h | 2.0A | 10μF |
| YDK300-4 | 203V-240V | 50/60Hz | 1200RPM | 2200m³/h | 2.1A | 10μF | |
| CPZ9-9 | YDK250-6 | 203V-240V | 50/60Hz | 850RPM | 2000m³/h | 1.9A | 10μF |
| YDK375-6 | 203V-240V | 50/60Hz | 850RPM | 2000m³/h | 3.5A | 10μF | |
| YDK375-4 | 203V-240V | 50/60Hz | 1200RPM | 2500m³/h | 3.5A | 10μF | |
| YDK550-4 | 203V-240V | 50/60Hz | 1150RPM | 3250m³/h | 4.6A | 20μF | |
| CPZ10-10 | YDK450-6 | 203V-240V | 50/60Hz | 850RPM | 3000m³/h | 3.5A | 20μF |
| YDK550-4 | 203V-240V | 50/60Hz | 1150RPM | 3250m³/h | 4.6A | 20μF | |
| CPZ12-9 | YDK750-6 | 203V-240V | 50/60Hz | 830RPM | 3000m³/h | 7.2A | 30μF |
| YDK900-4 | 203V-240V | 50/60Hz | 1250RPM | 6000m³/h | 8.0A | 30μF | |
| CPZ12-12 | YDK750-6 | 203V-240V | 50/60Hz | 830RPM | 3000m³/h | 7.2A | 30μF |
| YDK900-6 | 203V-240V | 50/60Hz | 880RPM | 7000m³/h | 8.6A | 30μF |
The two-outlet channels are termed channels 1 and 2. There are no conclusive differences in the measured data for either channel. The designations 1 and 2 only show which channel is throttled and where the pressure measurements are made.
Variation of total pressure in channel 1 versus flow rate at each channel. Variations in the total pressure of both channels are fairly similar. It does not make any difference which of the two outlet channels has a constant throttle point when the other is throttled. Pressure in the fixed throttled channel remains constant when the other channel is throttled. This is important since it shows that if application setting in one channel changes, the users of the other channel will not experience higher or lower heads.
Fan Blower Motor Centrifugal Exhaust Fan For Air Handling Unit AHU Centrifugal Blower
Inquiry Cart
0