Vacuum Adsorption Ink Printing Slotting 1226mm Corrugated Carton Machine 220pcs/Min

1226 Type Vacuum Adsorption Ink Printing Slotting Corrugated Carton Machine

Machine feature:

The machine is composed of feeding, printing, slotting, die-cutting and other parts. It can complete three layers at a time.
Five layers of corrugated board printing, slotting, die-cutting and other processes.

The thickness of the wall panel is 50mm, and the internal stress is adjusted by medium frequency to increase the density and hardness of the wall panel.
Strength, toughness, and conductivity, manual aging treatment, large machining center paired processing,
High strength, high precision.

Transmission system adopts gear transmission, high precision grinding process, low noise, enhanced
The strength of the gear improves the transmission stability of the gear. All transmission gears adopt No. 45
High quality steel, after high frequency quenching and tempering, super hard treatment, fine grinding processing, strong, durable .

Deep groove bearing adopts human-based, other bearings adopt Harbin, Wafangdian, Luoyang and other names
Brand bearings, one by one inspection, qualified standard storage

Each unit is powered by clutch and attached with alarm bell, which will ring continuously during clutch and clutch to ensure the operator
Safety of staff. Clutch motor with constant torque clutch, can buffer the wrong operation of each unit to each other
A collision.

On-line master lock: the main motor is automatically protected when the equipment is not combined, and the running signal is obtained
The motor stops running.

The main motor starts with frequency conversion. The motor adopts frequency conversion motor. The electric appliance adopts Siemens and other famous brands
Products.

Pneumatic components: pneumatic components using Yadeke and other famous brand products, diaphragm pump using Wuhan Jinchangjiang famous brand products.

The ink on the machine is uniform, the amount of ink is controllable, to prevent the overflow of ink, to ensure that the outside of the ink road is clean and clean.

Each unit is equipped with contact flow type oil level balance mechanism to prevent lubrication of individual units

Feed unit :

Electric control machine clutch with alarm bell, continuous ring between the alarm, to ensure the operator
Member of the security.

Drive shaft with friction clutch to avoid damage to the machine due to misoperation.

The main motor starts with frequency conversion, energy saving increases by about 30%.

Adopt high speed adsorption leading edge feeding system, feeding paper accurately and smoothly.

Vacuum adsorption paper feeding, to overcome the different degree of bending cardboard, ensure smooth paper feeding.

Electric adjustment of side baffle, manual linkage adjustment of front baffle clearance, electric adjustment of rear baffle position

Skip feeding device (continuous or separate sheet feeding device can be selected as required)

Scheduled production quantity can be set. When the plan is completed, the system automatically instructs to stop the paper feeding
Send a warning signal. PLC color touch screen, display printing, die-cutting phase setting, and can set, display the production quantity, to the single alarm.

Equipped with high quality brush, and equipped with dust absorption device, can remove a large number of cardboard printing surface
Impurities, improve the printing quality.

Seamless steel tube of the paper feeding roller is wrapped with wear-resistant rubber, and the balance is corrected. It is wear-resistant rubber of high quality
Adhesives, improves the compressive strength of cardboard, reduces the damage of feeding paper to corrugated cardboard.

Seamless steel tube of the paper feed roller, surface embossing process processing, and balance correction, improve
Friction to ensure the accuracy of paper feeding

Manual adjustment of the feeding roller gap, the adjustment range is 1-10mm, using the cross slider mechanism,
When adjusting the transmission gear to ensure the correct meshing state.

Main parameter

Printing unit:

1. Printing of high quality thick-walled seamless steel roll, surface conditioning, grinding, hard chromium plating.
2. All axes of roller correct by dynamic balance, the machinery running steady.

3. Handling print, the foot switch is convenient and flexible electric control reversing.
4. Printing , roller clearance adjusted by hand, the scale panel shows the data.

5. Printing phase fixed device, using pneumatic brake mechanism. While the machine separates or the phase is adjusting, the brakes can restrict the revolving of the machine platform and keep the fixed point of original gears position.

6. roller diameter Φ300mm, diameter with printing plate Φ312mm, adopt high quality thick seamless steel pipe, with surface grinding, hard chrome plating.

7. Use famous Dalian Tengda anilox roller, high quality steel, mesh is 220LPI or 250LPI as per customer need.

Rubber roller adopt high quality wear / oil and acid-base resisting, medium height grinding, better ink distribution effect.

8. The printing roller pressure adopt high precision crosshead shoe gapless adjustment to do micro adjustment, can make the printing pressure reach the best condition.

Soltting die cutting unit:

1. Press line wheel, arc convex flat pressing design, after prepressing the cardboard forming is better, not easy
Rupture.

2. The line and the prepressing wheel to adjust the gap adopts the self-locking structure, manual rapid adjustment, adjustment fan 0 to 10 mm.

3. Slotted knife seat horizontal movement adjustment mechanism Horizontal movement adopts screw with linear guide rail, so that the movement is more flexible, accurate

4. The slotted cutter shaft is treated by medium frequency tempering and grinding, and its surface is plated with hard chrome.

5. The width of the slotting knife is 7mm.

6. Equipped with slotted medium knife movement.

7. The gap adjustment of slotted tool seat adopts manual and fast self-locking structure

8. The upper tool seat and the lower tool seat adopt transmission linkage, keep the upper and lower tool alignment when moving, and extend
Tool life.

9. Line pressing wheel, slotting knife seat transverse position, using electric digital control.

Manual synchronous adjustment of electric phase.

Slotting phase adjustment mechanism.

Planetary gear construction

Slotting phase and box height, computer and electric digital control

After-Sales Service:

Training how to instal the machine, training how to use the machine.

Engineers available to service machinery overseas.

Q1. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q2. What is your terms of delivery?
A: DHL, TNT USP etc.

Q3. How about your delivery time?
A: Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 10 to 15 days.
Generally speaking, all of the goods can be reach your address within 4 weeks.

Q4. Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q5. What is your sample policy?
A: e can supply the sample , but the customers have to pay the sample cost and the courier cost.

Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Hebei SOOME Packaging Machinery Co., Ltd. Specializing in the manufacturer and sales of corrugated box machinery. Since its establishment in 1995, it is located in China“Dongguang”,Cangzhou city.

In order to speed up the production efficiency, there are three production workshops with a plant area of 20000 ㎡, 108 employees, production Capacity of 1800 sets per year.

We put our hearts in our mind to make no effort equipping each product.Especially we developed several new high speed automatically machines which improved the competition ability of our customers,also got the recognition of thousands packing companies from domestics and overseas based on the principle of honest and trustworthy.

Our products find a good sale in Argentina,Russia,India,Italy,Germany,Egypt,Vietnam,Spain,Iran,Turkey and so on.Anyone who cooperate with us is proud of our good after service and open-minded attitude.

Our goal is simple: to sell the best machines at the best prices, and provides industry-leading customer service. We personally get to know each of our customers, and we know how to discover the most valuable part of our business is SOOME packaging, to help others achieve their goals.