OEM High Pressure Solar Powered Water Pump / Solar Fountain Pump

Brand Name:FREESEA
Certification:CE Certificates
Model Number:FLS-750/72
Minimum Order Quantity:5 Unit/Units (Min. Order)
Delivery Time:7-15 work days
Payment Terms:L/C, T/T, Western Union, D/A, D/P
Contact Now

Add to Cart

Active Member
Location: Guangzhou Guangdong China
Address: 6th Floor,NO. 8, Aobang Plaza, Rd 2nd, Wanggang Gongye Street, Baiyun District, Guangzhou
Supplier`s last login times: within 37 hours
Product Details Company Profile
Product Details

High Pressure Dc Solar Powered Water Pump Solar Fountain Pump OEM Available


Paramerter:



Model

Voltage

Power(W)

Hmax(m)

Qmax(m³/h)

Port Size(mm)

Sloar Panel

Current



FLS-370/24

24V DC

370

10

10

50

2pcs 30V/250W Parallel connected

14.5A



FLS-550/60

60V DC

550

12

15

50

3pcs 30V/250W Series connected

9A



FLS-750/72

72V DC

750

13

16

50

4pcs 30V/250W Series connected

11.5A



Pump Use Precautions:


1. If the pump has any small faults, remember not to let it work. If the filler of the pump shaft is worn out, it should be added in time. If the pump is used continuously, it will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller.
2. If the pump has a strong vibration during use, be sure to stop and check what is the cause, otherwise it will cause damage to the pump.
3. When the bottom valve of the pump leaks, some people will fill it into the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This is not desirable. Because when the dry soil is put into the water inlet pipe, when the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and the bearing, which shortens the service life of the water pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced.

4, the pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.

5, the tape on the pump should also be removed, then rinse with water and dry in the light, do not put the tape in a dark and humid place. The tape of the pump must not be stained with oil, and do not apply some sticky material to the tape.

6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.


China OEM High Pressure Solar Powered Water Pump / Solar Fountain Pump supplier

OEM High Pressure Solar Powered Water Pump / Solar Fountain Pump

Inquiry Cart 0