Add to Cart
3KW 4KW 5KW Aquarium Water Pump Submersible Pump, 1/3-Hp, 115v Pool Circulating
Model | Voltage | HZ | Power (KW) | Power (HP) | Hmax (m) | Qmax(m³/h) | Port Size (inch/mm) |
FQS-370 | 220V-240V | 50 | 0.37 | 0.5 | 8 | 11 | 1.5/50 |
FQS-550 | 220V-240V | 50 | 0.55 | 0.75 | 12 | 16 | 1.5/50 |
FQS-750 | 220V-240V | 50 | 0.75 | 1 | 13 | 17 | 1.5/50 |
FQS-1100 | 220V-240V | 50 | 1.1 | 1.5 | 15 | 21 | 1.5/50 |
FQS-1500 | 380V | 50 | 1.5 | 2 | 16 | 25 | 1.5/50 |
Features:
Single or three phase, Class F, IPX5.
Silent operation, Concise design.
Liquid temperature less than 60 degree.
Can resist chemical in swimming pool.
Nice performance, Overload protection.
Nichel plated antirust spindle or stainless steel 304 weld spindle.
Huge pro-filter for less cleaning maintenance.
Heighteen pump base to keep water pump off the moist working
environment.
Arrange drain device of water pump.
Application:
1. Product qualifaction rate box 100%.
2. 1 years factory warranty period.
3. Less than 2‰ defective rate.
4. 24hrs after-sales service.
5. Water power.
Also known as effective power. Refers to the actual power of the
swimming pool pump used for water delivery per unit time, that is,
the output power of the swimming pool pump.
6. Efficiency.
The ratio of water power to shaft power is the pool pump efficiency
and is usually expressed as a percentage. It is a measure of the
energy utilization of the power pump delivered to the pool pump,
reflecting the performance of the pool pump.
Pool pump power
The reasonable matching of the swimming pool pump and the power is
of great significance to ensure the normal operation of the
swimming pool pump, and to obtain the rate and low energy
consumption. The power of the supporting power machine is
calculated according to the head h (meter) of the swimming pool
pump and the flow rate q m 3 / sec: kW. The head h is composed of
geometric head hj and pipe loss hs. It can be estimated by
hs=(0.1~0.2)hj in the initial selection. After the pipeline is
determined, it is calculated according to the type or size of the
pipeline and joint by hydrodynamic method or by looking up the
table. Where k is the power reserve coefficient, commonly used k =
1.05~1.3, when the power is large, take a small value; η1 is the
transmission efficiency, when the power machine is directly
connected with the swimming pool pump, η1=1; η2 is the swimming
pool pump efficiency, according to the pump type and work The
situation is determined.