

Add to Cart
Engineer Plastic 72v Dc Solar Powered Water Pump Solar Water Circulating System
Paramerter:
Model | Voltage | Power(W) | Hmax(m) | Qmax(m³/h) | Port Size(mm) | Sloar Panel | Current | ||
FLS-370/24 | 24V DC | 370 | 10 | 10 | 50 | 2pcs 30V/250W Parallel connected | 14.5A | ||
FLS-550/60 | 60V DC | 550 | 12 | 15 | 50 | 3pcs 30V/250W Series connected | 9A | ||
FLS-750/72 | 72V DC | 750 | 13 | 16 | 50 | 4pcs 30V/250W Series connected | 11.5A |
Application:
Irrigation purpose
Drinking Water
Leisure Applications
Pond aeration & livestock watering
Pond management
Drip & Sprinkler
Industry water supply
Water purification systems
Filtration and pool circulation
Pump Use Precautions:
1. If the pump has any small faults, remember not to let it work.
If the filler of the pump shaft is worn out, it should be added in
time. If the pump is used continuously, it will leak. The direct
effect of this is that the motor consumes more energy and can
damage the impeller.
2. If the pump has a strong vibration during use, be sure to stop
and check what is the cause, otherwise it will cause damage to the
pump.
3. When the bottom valve of the pump leaks, some people will fill
it into the inlet pipe of the pump with dry soil and flush it to
the bottom of the valve. This is not desirable. Because when the
dry soil is put into the water inlet pipe, when the water pump
starts to work, the dry soil will enter the pump, which will damage
the water pump impeller and the bearing, which shortens the service
life of the water pump. When the bottom valve leaks, it must be
repaired. If it is serious, it needs to be replaced.
4, the pump must pay attention to maintenance after use, for
example, when the pump is used up, the water in the pump should be
cleaned, it is best to remove the water pipe and then rinse with
water.
5, the tape on the pump should also be removed, then rinse with
water and dry in the light, do not put the tape in a dark and humid
place. The tape of the pump must not be stained with oil, and do
not apply some sticky material to the tape.
6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.
Features:
1. Permanent Magnet Brushless motor, combined with controller,
reaches the max efficiency over 85%.
2. Motor control system has complete electrical protecting
controller device, against under-voltage, over-voltage, over flow,
overload, waterless etc; automatic recovery; controlling water
height as demand; reliable and safe.
3. Advanced controller with MPPT technology for maximum solar power
4. Convenient installation and environmental protection.
5. No sepcial requirments on well pipe.
6. Ambient temperature: -20-50 degree Celsius.
We Promise:
1) We are very glad that customer give us some suggestion for price
and products.
2) If any question, please let us know it in the first by E-mail or
Telephone. We can deal with them for you in time.
3) We will send many news styles in every week to our old
customers.
4) Offer our customers the lowest prices. Streamline the buying and
paying processes.
5) Deliver goods to our customers all over the world with speed and
precision.
6) Ensure the excellent quality of our products.
7) 12 months FREE warranty.
8) Accept OEM