HDPE Siphon 45 Degree Elbow With Inspection PN6 50mm 75mm 110mm 160mm
Brand Name:CR
Certification:ISO9001-2008, BV ,SGS, CE etc certification.
Model Number:50mm-160mm Syphon HDPE Fittings
Minimum Order Quantity:>15 Pieces
Delivery Time:40GP during 2~3 Weeks or as required
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Active Member
Location:
Chengdu Sichuan China
Address:
Room13,15/F Building1, Nine Miles Square No.39 Jiancai Road,Chengdu,China.
Supplier`s last login times:
within 24 hours
Product Details
Company Profile
Product Details
PN6 75mm 110mm 160mm HDPE Draining Fittings Siphon 45 Degree Elbow with Inspection
Description of HDPE Siphon Fittings
1)CHUANGRONG High Density Polyethylene HDPE: Density 951 – 955 kg/m3
The density of polyethylene can be 910 – 960 kg / m3. CHUANGRONG fittings and pipes
Weighing 955.29 kg / m3, its characteristics not only have durability. And light weight, very convenient
for transportation and installation.
2)Reduced reversion
Reduce shrinkage and improve installation strength. The HDPE replica produced by CHUANGRONG
manufacturing process is less than 15mm.
3)Resistance to cold
CHUANGRON siphon pipeline has anti-freezing performance. When the water in the pipeline is frozen,
ordinary pipeline will freeze and crack, but CHUANGRONG HDPE will not.
Characteristics of Siphon HDPE Pipe System
1)Heat expansion
The thermal expansion of HDPE also needs to be considered in the design and installation. As a rule
Thumb, for every 50 ° C increase in temperature, 15 mm expansion per meter of pipe
Can be expected.
2)Resistance to hot water
Geberit HDPE allows temperatures up to 100 ° C for short periods of time (such as steam surges), and
can be safely used as wastewater pipes without mechanical load up to 80 ° C.
3) Resistance to impact
CHUANGRONG HDPE is also very suitable for installation in
The parking lot and pedestrian zone are indestructible at room temperature. Its impact resistance is very
high, Even at extremely low temperatures (down to about -40 ° C).
Spcification of Siphon HDPE Fittings Siphon 45 Degree Elbow with Inspection
| SIZE(mm) | 50 | 75 | 110 | 160 |
Application of Syphon HDPE Fittings
1)Garden project: planting underground garage roof, green roof, soccer fields, golf courses, beach, saline,
desert planting.
2)Construction: basement floor level seepage, construction basis of
the upper, lower, basement seepage
level facades,insulation.
3)Traffic engineering: tunnels, roads, railway embankment, dams,
slope protection.
4)Municipal Engineering: Metro, road embankment, landfill
5)Renovation: moisture, noise, vibration, threading.
Certifications of Siphonic HDPE Fittings
We can supply ISO9001-2008, BV ,SGS, CE etc certification.
All kinds of products are regularly conducted pressure-tight
blasting test,longitudinal shrinkage rate test,
quick stress crack resistance test, tensile test and melt index test, so as to ensure the quality of products
totally reach the relevant standards from raw materials to finished products.
HDPE Siphon 45 Degree Elbow With Inspection PN6 50mm 75mm 110mm 160mm
Inquiry Cart
0