Home /Contactors /

Motor Control Cabinet AC Motor Contactor Fan Start Reduced Voltage 380V~415V 3 Phase

Motor Control Cabinet AC Motor Contactor Fan Start Reduced Voltage 380V~415V 3 Phase

Brand Name:None
Certification:CE
Model Number:Star-delta starter / Custom
Minimum Order Quantity:1 Unit
Delivery Time:5-8 working days or bulk order negotiate
Payment Terms:T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Location: Wuxi Jiangsu China
Address: 606#, Building-B, 100 Dicui Road, Binhu District, Wuxi, Jiangsu, China
Supplier`s last login times: within 26 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

Star-delta Starter Motor Control Cabinet for 11~90kW Water Pump or Fan Start at Reduced Voltage 380V~415V 3 Phase


Most induction motors are started directly on line, but when very large motors are started that way, they cause a disturbance of voltage on the supply lines due to large starting current surges.

To limit the starting current surge, large induction motors are started at reduced voltage and then have full supply voltage reconnected when they run up to near rotated speed.


Working Principle of Star-Delta Starter

This is the reduced voltage starting method. Voltage reduction during star-delta starting is achieved by physically reconfiguring the motor windings as illustrated in the figure below. During starting the motor windings are connected in star configuration and this reduces the voltage across each winding 3. This also reduces the torque by a factor of three.


Scheme – Working Principle of Star-Delta Starter


After a period of time the winding are reconfigured as delta and the motor runs normally. Star/Delta starters are probably the most common reduced voltage starters. They are used in an attempt to reduce the start current applied to the motor during start as a means of reducing the disturbances and interference on the electrical supply.


The Star/Delta starter is manufactured from three contactors, a timer and a thermal overload. The contactors are smaller than the single contactor used in a Direct on Line starter as they are controlling winding currents only. The currents through the winding are 1/root 3 (58%) of the current in the line.

There are two contactors that are close during run, often referred to as the main contractor and the delta contactor. These are AC3 rated at 58% of the current rating of the motor. The third contactor is the star contactor and that only carries star current while the motor is connected in star.

The current in star is one third of the current in delta, so this contactor can be AC3 rated at one third (33%) of the motor rating.


We provide star-delta starter control board integrating Chint l low-voltage components below, with normal range from 15kW, 18.5kW, 22kW, 30kW, 37kW to 45kW at rate voltage AC380V/50Hz.


China Motor Control Cabinet AC Motor Contactor Fan Start Reduced Voltage 380V~415V 3 Phase supplier

Motor Control Cabinet AC Motor Contactor Fan Start Reduced Voltage 380V~415V 3 Phase

Inquiry Cart 0