2.5y Ss 316l Metal Corrugated Plate Structured Packing In Distillation Tower
Certification:ISO-9001
Minimum Order Quantity:0.1 cubic meter
Delivery Time:3-5 days
Payment Terms:T/T, L/C
Place of Origin:China
Price:negotiation
Contact Now
Add to Cart
Verified Supplier
Location:
Hengshui Hebei China
Supplier`s last login times:
within 32 hours
Product Details
Company Profile
Product Details
2.5Y Metal Corrugated Plate Structured Packing in Distillation Tower
1. metal corrugated plate structured packing inspection:
1 Each batch of structured packing shall be inspected by the quality inspection department according to the contract before leaving the factory.
2 The appearance of packing plate shall be flat and free of rust.
3 The peak height, wave distance, inclination and tooth angle of the packing shall meet the corresponding standards.
The deviation between the accumulated length of the peak height of every 100 pieces and the accumulated length of the actual product 100 pieces is: the positive deviation is not more than 1h, and the negative deviation is not more than 2h.
4 The diameter, Ovality and levelness of packing disc shall meet corresponding requirements.
5 For the hole diameter d0, hole center distance t and fine grain on the plate, only visual inspection shall be conducted, and the hole shall be free of burr, and the holes and fine grain shall be evenly distributed.
6 the allowable deviation of steel strip thickness shall comply with the provisions of GB / T 4239.
2. Structural dimension and characteristic parameters of stainless steel orifice corrugated packing.
| Item | Unit | 125X | 125Y | 250X | 250Y | 350X | 350Y | 500X | 500Y | |
| corrugation height h | mm | 24.0 | 11.5 | 8.4 | 6.0 | |||||
| corrugation inclination θ | (°) | 30 | 45 | 30 | 45 | 30 | 45 | 30 | 45 | |
| corrugation distance 2B | mm | 39.6 | 19.0 | 14.0 | 9.9 | |||||
| corrugation angle β | (°) | 79.0 | 79.1 | 79.6 | 79.0 | |||||
| void fraction ε | δ=0.15mm | % | 99.4 | 98.6 | 98.0 | 97.2 | ||||
| δ=0.12mm | % | 99.5 | 98.9 | 98.4 | 97.8 | |||||
| δ=0.10mm | % | 99.6 | 99.1 | 98.7 | 98.2 | |||||
| Perforated hole diameter d0 | mm | 4.5 | 4.5 | 4.0 | 4.0 | |||||
| Opening rate σ | % | 8.5-9.5 | 8.5-9.5 | 9.0-10.0 | 9.0-10.0 | |||||
| radius of curvature of the top circle of corrugation angle R | mm | ≤2.0 | ≤1.4 | ≤0.9 | ≤0.5 | |||||
Note: The influence of opening rate on the plate is not calculated
3. Classification of metal corrugated plate structured packing
Packed tower is a kind of gas-liquid mass transfer equipment with a
large number of packings in the tower. Packed column was used in
industrial production in the middle of the 19th century. Since
then, it has developed with plate column, forming two different
types of gas-liquid mass transfer equipment.
The body of the packed tower is a vertical cylinder with a
supporting plate at the bottom. The packing material is placed on
the support plate in a integral way. A packing pressing plate is
installed above the packing to limit the movement of the packing
with the updraft. The liquid is added from the top of the tower,
sprayed onto the packing through the liquid distributor, and flows
down the packing surface. The gas is sent from the bottom of the
tower and distributed by the gas distribution device (gas
distribution device is generally not set for small diameter tower),
then it is countercurrent with the liquid and continuously passes
through the gap of the packing layer. The gas-liquid two-phase is
in close contact with the packing surface for mass transfer. Packed
tower is a continuous contact gas-liquid mass transfer equipment,
the two-phase composition changes continuously along the tower
height. Under normal operation, the gas phase is continuous phase
and the liquid phase is dispersed phase.
4. Marking, packaging, storage and transportation of metal corrugated plate structured packing
1 Packing list shall be provided for finished structured packing, including product name, model, specification and size, manufacturer name and production date. At the same time, the product inspection certificate shall be provided, including inspection items, inspection date and seal of inspection personnel.
2 The finished products shall be packed in cartons, wooden boxes, or wooden plates, and the packing tray shall be placed horizontally. The name and model of the product, the name of the manufacturer and the quality of the product shall be indicated on the outside of the packaging box, and the words or marks such as "strictly prevent humidity" shall be included.
3 It is strictly prohibited to impact the product and rain it directly during transportation.
4 Products shall be stored in a ventilated and dry room, and shall not be stacked laterally.
Material
SS304, SS316L, others as per order.
every year we manufacture and supply hundreds of cubic meters of metal structured packing in different models. There are many popular types and materials for option. Custom order is welcome, too! We are happy to help with what you need!
2.5y Ss 316l Metal Corrugated Plate Structured Packing In Distillation Tower
Inquiry Cart
0