Add to Cart
Glass Raw Material Sand Recovery Machine High Safety With Slurry Pump
About product
In the past few years, we improve our core technology, successfully produce this vertical sand recycling machine to connect bucket wheel washer directly, and make a complete sand washing system. On the basis of the original dewatering screen, cyclone installed vertical to the screen surface. According to the principle of fluid mechanics, the recovery rate is higher than ordinary type, and the solid content will controlled to lower levels from overflow waste water, to achieve higher effect of sand recycling work. Widely used in mud purification, artificial sand production line, hydro power station and sand aggregate system, glass raw material processing system and coarse slime recovery, and fine material recovery.
Tech specification
Model | Water Consumption (m³/h) | Screen size W*L (mm) | Cyclone Model /NO.(mm) | Power (Kw) | Weight (kg) | Dimension L*W*H(mm) |
MZ09-25 | 30-60 | 900*1800 | 250 | 12.5 | 1400 | 2000*1300*2900 |
MZ12-30 | 50-120 | 1200*2400 | 300 | 19.5 | 2044 | 2515*1580*2930 |
MZ15-65 | 80-160 | 1500*3000 | 300/2 | 36 | 3000 | 3327*1880*3200 |
MZ18-100 | 150-240 | 1800*4500 | 250/4 | 52 | 7164 | 4744*2500*3200 |
MZ24-120 | 200-300 | 2400*4500 | 300/4 | 75 | 8200 | 4744*3200*3200 |
MZ24-180 | 40-80 | 2400*4500 | 300/6 | 89 | 8800 | 4744*3200*3200 |
Working principle
The finished material of the sand washing machine directly enters
the dewatering screen for dehydration. The mud water discharged
from the sand washing machine enters the equipment cleaning tank,
and is pumped to the high pressure separator through the bottom
vacuum high pressure pump for classification and concentration. The
sand mouth enters the dehydration, and other waste water, mud,
powder, impurities, etc. are discharged into the return water tank
through the overflow port of the high pressure separator.
Structure
Main points
1. It can effectively reduce the runoff amount of the fine
material; solve the problem of end product fineness modulus on the
high side, stone powder content on the low side.
2. The fine material can be recycled as high as 95%, with
incomparable technical and economic advantages
3. The machine will be assembly by our factory before complete
supply; users shall inspect the machine carefully after receiving
it, in order to avoid the contingent collision damage during the
process of transportation.
4. The installer should be familiar with the product structure,
performance and technical requirements, formulate appropriate
procedure in advance of the installation.