Heat Treatment Tiltable Gas Carburizing Furnace Low Carbon Steel
Brand Name:SUPER
Certification:ISO
Model Number:RG-45-9
Minimum Order Quantity:1set
Delivery Time:15-20 working days
Payment Terms:T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Zhengzhou Henan China
Address:
No.95 Tongbai Road ,Zhengzhou city ,Henan Province ,China
Supplier`s last login times:
within 42 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Heat Treatment Tiltable Carburizing Furnace Low Carbon Steel
Tilting rotary resistance carburizing furnace Structure:
Furnace body: composed by the body, bracket, bearing seat. The body consists of furnace shell,
lining and furnace tank. In order to facilitate the installation and maintenance of the
furnace tank, both ends are bolted. The refractory layer of the lining is made of ultra-lightweight
refractory brick masonry. The insulation layer is made of aluminum
silicate refractory fiber and expanded perlite block. The heating
element is made of spiraled resistance wire and fixed on the
bricks. Furnace tank material can be cast steel and welded steel.
Welded with thick heat-resistant steel plate. There are two
anti-mixed bar. The front end of the furnace tank is supported by a
roller, and the rear end is supported by a fixed bearing. The
furnace is free to expansion and shrink due to temperature changes.
Gas and liquid media are injected from the rear of the infusion
device, the exhaust from the front door discharge and burning, the
workpiece is loaded and unloaded from the door.
Rotary and tilting device: composed by motor, gearbox, big & small sprocket, chain. The
tilting angle is adjustable.
Drip and gas supply system: organic liquid and ammonia and other media, respectively, injected from the top of the two pipe fittings nozzle. Measured by observing the amount of liquid droplets, ammonia and other gas flow through.
Control system: using a high-power SCR PLD zero-crossing trigger system, with a radiator and a full set of air-cooled system. At the same time equipped with automatic air switch and fastener for secondary protection. Each group of electric resistance elements is set a ammeter, voltmeter and electric components on and off instructions, with power interlock protection and safe grounding measures to ensure the use of safety.
Rotary Carburizing Furnace Features:
1. This furnace is heated by resistance,controlled by solid state
relay and intelligent instrument of Japan conductive company,and
using PID adjusting method,has the advantages of accurate
temperature control,simple operation,stable performance.
2. Working zone uses sealed cylinder-shaped chamber furnace made of
imported high temperature stainless steel,it rotates automatically
after the workpieces are putting into the furnace chamber to make
the workpieces be heated uniformly.It can also be passed into
various gas to meet various technological requirements of
workpieces.
Technical parameters of Tiltable Roller Retort Carburizing Furnace
| 1. Working power supply | AC/3-phase 4-wire/380-440V/50/60Hz |
| 2. Rated power | 45Kw |
| 3. Rated temperature | 950°C |
| 4. Temperature control way | PID power regulation,instrument of Japan conductive company |
| 5. Temperature accuracy | ±1°C |
| 6. Temperature uniformity | ±5°C |
| 7. Heating element | 0Cr25Al5Fe+Cr resistance wire,spiral |
| 8. Heating element connection | Y |
| 9. Dimensions of Effective work zone | Diameter * length=300*620mm |
| 10. load capacity of 1 batch | 100Kg |
| 11. Operating motor of Furnace chamber | 1 set ,1.5Kw,adjust speed by magnetic |
| 12. Rotating speed | 0.5-8 r/min |
| 13. Tilting motor of furnace body | 0.55KW Hand/electric (all in one) speed reduction unit |
| 14. Max Tilting Angle of furnace body | +/-50 degree |
| 15. No-load power loss | Less than 4KW |
| 16. No-load heating time(Normal Temp:950°C) | About 2.5 hours |
| 17. Shape dimension | 2100*2200*2100mm |
| 18. Net weight | 2.6 Tons/set |
standard model of SUPER carburizing furnace:
| Model | Furnace chamber size | Rated power | Rated temperature | Phase | Rated voltage |
| RG-30-9 | D300×L620 mm | 30 kw | 950 degree celcius | 3 | 380-440V |
| RG-45-9 | D520×L680 mm | 45 kw | 950 degree celcius | 3 | 380-440V |
| RG-60-9 | D600×L750 mm | 60 kw | 950 degree celcius | 3 | 380-440V |
| RG-120-9 | D750×L1000 mm | 120 kw | 950 degree celcius | 3 | 380-440V |
Before sales:
1. Prompt Response (< 12hours).
2. 24 hours technical consultant service
3. Full Support in living and touring in China while customer visiting the factory.
After sales:
1. Prompt Response (< 12hours).
2. One - One customer service with duration over 5 years.
3. Engineers available to service machinery overseas.
Heat Treatment Tiltable Gas Carburizing Furnace Low Carbon Steel
Inquiry Cart
0