40 CrMo Shank Cylindrical Carbide Burr Carving Bits For Wood
Brand Name:KINGTOOLS (KTS)
Certification:ISO9001:2008
Model Number:SB/BS-5/SB-5M
Minimum Order Quantity:100 Piece/Pieces
Delivery Time:7-15 Day
Payment Terms:L/C, T/T, Western Union，Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu Sichuan China
Address:
No. 1700, North Section of Tianfu Avenue, High-Tech Zone, Chengdu, Sichuan, China
Supplier`s last login times:
within 33 hours
Product Details
Company Profile
Product Details
40 CrMo Shank Cylindrical Carbide Burr Carving Bits For Wood
Product Description:
Material: 100% of raw materials.
Tolerance: strict tolerance extent control, which can reach +/-0.01mm;
Grades: various for choice: YG6, YG8, YG8C, YG11C,YG15C and so on.
Types: standard, conical, parabolic,ballistic
Physical performance: high hardness and impact toughness, very good mechanical & chemical stability.
How to use the carbide burrs:
1. Speed /RPM
The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it.
The contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM.
The table below shows some approximate speeds:
| Diameter of Burr RPM | |
| 3mm or 1/8" | 17,000 - 26,000 |
| 2.35mm or 3/32" | 17,000 - 26,000 |
| 6mm or 1/4" | 11,000 - 16,500 |
| 12mm or 1/2" | 8,000 - 12,000 |
| 16mm or 5/8" | 7,650 - 11,500 |
2. Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and
apply only a little pressure otherwise the cutting edges of the
flutes will chip away or become smooth too quickly, reducing the
life of your burr.
3. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long
as this will prevent the burr from digging and jabbing into your
material causing unsightly marks and roughness.
Different sizes of Type A
Product Application:
Can be used to finely process metal die cavity and mechanical
chamfering, rounding, grooves, and clean up burrs of castings,
flashings of forgings, welds of weldments.
Mainly used for grinding channel impeller, cleaning tubes,
finishing mechanical internal surface, enlarging holes, processing
and engraving metal non-metal materials.
Advantages:
* High hardness, wear-resistant and durable
* Anti-corrosion
* Smooth chip evacuation
* No dust pollution
* Tungsten carbide
* Sharp and wear-resistant
Packing&Shipping
Each product has a separate plastic box , according to the different quantity you need, we will provide you with different packaging according to your requirements.
40 CrMo Shank Cylindrical Carbide Burr Carving Bits For Wood
Inquiry Cart
0