Sysolution RC200 Series Power Supply DC 5V for LED Vehicle Screen
Brand Name:Sysolution
Model Number:RC200D4.5/RC200D4.5/RC200D5
Minimum Order Quantity:1
Delivery Time:2-3 working days
Payment Terms:T/T,PayPal
Place of Origin:China
Contact Now
Add to Cart
Site Member
Location:
Shanghai Shanghai China
Address:
Room 719, Hai Liang Building B, ZhongJiang Road, 200062，PutuoDistrict, Shanghai ,China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Sysolution RC200 series power supply
Product Introduction:
Sysolution RC200 is designed for vehicle screens, supplys ultra-low
temperature starting. With high-reliability, it passed 100% full
load aging test. RC200 series includes RC200D4.2, RC200D4.5 and
RC200D5. These products could protect short out, overcurrent,
overvoltage, inversed grafting and over-temperature.
Product Images:
Functions and Features:
- Output delay protection, extend battery life.
- Cryogenic start.
- High reliability : 100% full load aging test.
- Green LED light- Power supply indication status.
- Suitable for taxi-screen application.
Specification parameters:
| Power Model | RC200D4.2 | RC200D4.5 | RC200D5 | |
| Project | Function | Parameter | ||
| Input Characteristic | Input voltage range | 9～36Vdc | ||
| Power frequency range | 80～100KHz | |||
| Maxi input current | 25A MAX | |||
| Full load efficiency | ≥87% | ≥88% | ≥89% | |
Input impulse current (Cold boot) | Less than 100A, cold start | |||
| Output Characteristic | Output voltage | 4.2V | 4.5V | 5.0V |
| Output voltage error range | ±3% | ±3% | ±3% | |
| 4.07V～4.33V | 4.35V～4.65V | 4.85V～5.15V | ||
| Output current | 0～40A | 0～40A | 0～40A | |
| Maxi power | 168W | 180W | 200W | |
| Ripple and noise | 200mVp-p MAX | 200mVp-p MAX | 200mVp-p MAX | |
| Power adjustment rage | ±1% | |||
| Load regulation | ±2% | |||
| Boot delay time | =12S 12Vdc @ full load (Can be custom-ed by request) | |||
| Output climb time | 0.1～100mS/12Vdc @ full load | |||
| Output holding time | ≥10mS/12Vdc @ 80% of full load | |||
| Protective Properties | Out put over-current protection | Rated output power 120%-200% protection. Mode : burp mode, automatic recovery after removal of abnormal load conditions | ||
| Output short circuit protection | Protected mode :burp mode, automatically restored after short circuit condition is removed | |||
| Output over-voltage protection | Output voltage greater than 6.5V output burp protection | |||
| Input back connect protection | The input anode and cathode are connected to the reverse power supply | |||
| Over temperature protection | The power supply exceeds the rated power and the overtemperature protection starts | |||
| Output Signal | Output instruction | Led Power indication | ||
Working Conditions:
| Work Parameter | |
| Cooling node | Natural cooling |
| Working humidity requirement | 20～90% non-condensing |
| Request of store temperature and humidity | -30～85℃,10～95%RH |
| Vibration specification | 10～500Hz,5G 10min./cycle,60min.each along X,Y,Z axis |
Dimension:
unit:mm
Packing:
| Packing way | Bubble bag + Cartons(40 Units/Each box) |
| Net weight | 0.25Kg/Each*40；Each box net10Kg |
| Rough weigh | 10.5Kg |
| Boundary dimension | 315*285*165mm |
Cautions:
- The following is the bottom view, the fixing screw is M3, the part of the power supply should be less than 3.5mm, otherwise the power supply may be damaged or cause danger.
- The power supply shall be installed directly in the metal box of the system for good heat dissipation. Under poor heat dissipation conditions, it is recommended to use a load of less than 80%.
Sysolution RC200 Series Power Supply DC 5V for LED Vehicle Screen
Inquiry Cart
0