Add to Cart
Linear sand vibrating screen use the motor as vibrating source, the material can be thrown up in screen surface and moved in the straight at the same time, which was discharged from different discharge port. Linear vibrating screen mainly consists of t he eccentric block vibrator, screen box, motor and supportive. Through the flexible coupling, the motor drives the eccentric block of the vibrator at high rotary speed, generating the centrifugal force, and then lead the screen box to do circular movement by the amplitude. After that, the material in the slope screen surface will be cast continuously by the force generated from the screen box, then realize the purpose of classifying.
Model | Mesh size (mm) | Feeding Size (mm) | Amplitude (mm) | Layers | Power(KW) | Dimension(mm) |
520 | 500*2000 | 0.074-10 | 4--10 | 1--5 | 0.4*2 | 2140*808*848 |
525 | 500*2500 | 0.074-10 | 4--10 | 1--5 | 0.4*2 | 2642*808*848 |
1. The linear vibrating screen uses the vibration motor to excite
as a vibration source.
2. Several specifications of on-screen and under-screen objects are
generated through the multi-layer screen, and are discharged from
their respective outlets.
3. With low energy consumption, high output, simple structure, easy
maintenance, fully enclosed structure, no dust spillage, automatic
discharge, suitable for assembly line operation.
1. Mind linear vibration screen (vibrating sieve, sifter machine)
is suitable for screening all of dry material(from 0.074mm to 20mm)
or mesh size(from 2-600mesh)
2. It supports at most 6 layers. But 2/3 layers at most is highly
recommended.
3. The dimension size and voltage are both supported to be
customized. The voltage is supported to be customized.
220/240/380/415/450V are all available. 50 or 60HZ.
4. The largest screening area can arrive to 2000mm*3000mm.
5. The motors is installed below screening box.
6. In general, its inclined angle is 0~10°.
7. With large capacity, small volume, high screening efficiency,
high frequency, easily changed screen and good safe performance.
8. Low consumption with high yield and low cost.
9. Can be used for single-layer, multi-layers screening with long
life.
10. Simple structure, easy to install and maintain.
11. Sieve body parts adopt steel plates and sectional material
welded together (part of the body for bolt connection) the overall
good stiffness, strong and reliable.
12. Good sealing without dust flying.
13. Material auto discharge, be able to continuous operation.
Dry mortar mixing equipment can produce the following dry mortars: Bonding mortar: Masonry mortar, wall and floor tile adhesive mortar, anchorage mortar etc. Decoration mortar: Decorative plaster, inner and outer wall putty, colorful decoration mortar etc. Protection mortar: Water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildewproof mortar, shielding mortar etc.