Lightweight Manual Hydraulic Pump S-SY12.54 Type Convenient Use

S-SY12.54 type manual hydraulic pump instructions

The S-SY 12.54 manual hydraulic pump is used for the pressurization of the vulcanizer. It has the advantages of small size, light weight, simple structure, beautiful appearance, convenient use and maintenance, etc. It is an ideal portable manual hydraulic pump
The working medium of the pump is clean water with a temperature of 5 ~ 60 °C

The pump is a vertical single-cylinder manual reciprocating pump, which is composed of main components such as water tank, cylinder block, plunger, inlet valve group, pressure gauge, handle drain valve and working nozzle. During operation, the handle moves the plunger up and down. When the
plunger rises, the inlet valve opens, the working medium is drawn into the cylinder. When the plunger is depressed, the inlet valve opens and the working
medium is drawn into the cylinder. When pressed, the inlet valve closes, the outlet valve opens, and the medium is pressurized and discharged from the side. When the pressure rises to the required working pressure, the pump is kept under pressure, the pressure gauge indication value is the working
pressure, the pressure holding is over, the drain valve is opened, and the working medium is returned to the water tank to relieve pressure
Install the pressure gauge first. (The seal between the table and the pipe joint is the 0-ring seal l Ox 19GB 1235-86 handle and the work joint (high pressure joint and quick joint assembly). The water tank is filled with the medium and then starts working
During use, please add a few drops of oil to the plunger and pin at regular intervals to lubricate. If leakage is found, it should be repaired first. If
tightening the threaded joints, adjust the pressure nut of the plunger seal. If it is found that the pressure holding performance is poor or the boosting speed is too slow, it is mainly necessary to check whether the drain valve is closed, and then check whether the inlet valve leaks. If necessary, remove the cleaning, repair or replace the grinding

When the pump is inactive for a long time, it should drain the inner cavity and drain the anti-rust oil or oil for anti-corrosion treatment.

Jiangyin Tongxin Vulcanizing Machine Factory (formerly Jiangyin Vulcanizing Machine Factory) is located in the scenic Jiangyin Golden Triangle Development Zone in the north of Wuxi City. It was built in 1984 and has 56 employees and 15 engineers and technicians. 21,000 square meters, fixed assets of 5.08 million yuan, is one of the enterprises affiliated to Jiangyin City Industrial Bureau of Jiangsu Province.

The company's main products are DGLJL type electric heating tape vulcanizing machine, DJSL type electric heating tape water cooling vulcanizing machine and vulcanizing machine, repairer parts. The main technical quality indicators of the vulcanizing machine produced by the company are close to the advanced level in foreign countries.

The products have passed the provincial appraisal. The company implements the IS09001:2015 quality management system standard, and the customers are all over the country. It has been rated as the city's quality products for three consecutive years. And for five consecutive years was rated as the city's contract and keeping promises units. The company has a complete set of special equipment for the production of vulcanizing machines and tooling, fixtures, testing equipment and quality assurance system, welcome customers to visit us.