PVC PVG Core Heat Vulcanized Joint Compound High Performance Flame Retardant

PVC PVG whole core flame retardant belt heat vulcanized joint compound

Operating procedure of the whole core with joints:

1. Put the beam column, water plate and the lower plate of the curing machine in order to set up the working platform. Find a right angle, cut one end of the belt into full edges, and fix the belt with a G-shaped card;

2. Make a mark from the two sides of the right-angle rubber to the middle of the belt. Bounce the break line on the two marks, then find the middle point on the right line and the break line, make a mark, and then mark 20 mm apart in sequence The split line is popped up with the elastic line on the corresponding number of the broken line and the right angle line;

3. Heat the upper and lower vulcanization boards until the belt is soft, cut the tooth line, and then grind the break and the tooth part evenly. After cleaning with a cleaning agent, lay the rubber flat and then paint sk833;

4. After the retaining iron is fixed on the side of the joint, fix the vulcanization plate and the beam and column, fill the water with a test pump, insert the heating wire into the vulcanization plate to start heating;

5. After vulcanization is completed, release the vulcanizing machine water pressure when the vulcanizing temperature drops to 70 ℃, and then dismantle the vulcanizing machine.

Jiangyin Tongxin Vulcanizing Machine Factory (formerly Jiangyin Vulcanizing Machine Factory) is located in the scenic Jiangyin Golden Triangle Development Zone in the north of Wuxi City. It was built in 1984 and has 56 employees and 15 engineers and technicians. 21,000 square meters, fixed assets of 5.08 million yuan, is one of the enterprises affiliated to Jiangyin City Industrial Bureau of Jiangsu Province.

The company's main products are DGLJL type electric heating tape vulcanizing machine, DJSL type electric heating tape water cooling vulcanizing machine and vulcanizing machine, repairer parts. The main technical quality indicators of the vulcanizing machine produced by the company are close to the advanced level in foreign countries.

The products have passed the provincial appraisal. The company implements the IS09001:2015 quality management system standard, and the customers are all over the country. It has been rated as the city's quality products for three consecutive years. And for five consecutive years was rated as the city's contract and keeping promises units. The company has a complete set of special equipment for the production of vulcanizing machines and tooling, fixtures, testing equipment and quality assurance system, welcome customers to visit us.