PCB Placement SMD Assembly Machine High Speed Chip Mounter 4.5mm Nozzle Buffer

Jaguar High Speed Chip Mounter for SMT Production Line

[technical parameters]

Number of feeders:64pieces

Number of mounting head:6head

Number of pallets:6pieces

Average power:500W

positioning accuracy:0.01mm

Nozzle buffer range:4.5mm

Power Supply:220V, 50Hz

Compressed air: 0.5-0.6Mpa

Drive motor: Panasonic servo motor /HW-QiGn stepper motor

Identification mode: six head synchronous identification

Suction nozzle vacuum source:High speed on-off vacuum generator with vacuum destruction

Maximum board area:625×455mm XY

Maximum range of motion:629×679mm Z axis maximum range:20mm

Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached to the chip)

Maximum theory speed: 15000 Pcs/ hours LED,

Resistance capacitance actual patch speed: 12000 Pcs/ hours

Hybrid visual mount average patch speed: 8500Pcs/ hours

XYZ drive rail: TBI high precision heavy duty linear guide rail.

Motion drive system: Panasonic AC servo -A6

Driver Operating system: Based on the Windows operating system, China JAGUAR record company independent research and development automatic placement machine operating system, support Windows XP, win7 operating system

Component angle: 0-360 degrees at any angle, the movement of synchronous rotation X/Y

Mode of operation: QiGn-2017 version of intelligent curve acceleration and deceleration linkage system

MARK point positioning: automatic scanning (can be arbitrarily set MARK points)

Intelligent alarm: automatic correction, Automatic patch, lack of material alarm

Into the plate mode: single segment from left to right transmission, can be connected to the automatic connection platform system, automatic PCB transmission positioning. Thimble positioning, manual release plate.

Visual display: 17 inch industrial control display ratio 4:3 resolution 1280x1024

Programming mode: peer to Peer programming, visual programming, PCB file import, etc.

Optimization mode: three automatic optimization modes (including V2017 intelligent optimization)

To identify the number of cameras: a Mark recognition camera, six high speed identification camera, a high resolution precision recognition camera

Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes, transistors, SOT, and 40*40mm in the range of pin spacing is greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center), etc..

Product weight:500KG Size (length and width): 1450*1370*1350mm (without display and keyboard)

Shenzhen Jaguar Automation Equipment Co., Ltd (referred to as "Jaguar") is a High-speed developing enterprise of High Precision Automatic lead-free Equipment such as reflow oven and wave soldering machine manufacturer, which specializes in lead free machine research and development.

As one of the well-known lead-free electronics equipment manufacturers in China, JAGUAR was founded in 2009 and headquartered in Shenzhen.

With full implementation of the PID process, reliability design concept and reliability testing throughout the entire product line, The company insists on market demand, established offices in various provinces and cities in the country.