Add to Cart
High Quality and Low Price Zinc Oxide Rotary Kiln with 180-10000t/h
Zinc Oxide Rotary Kiln Introduction:
Zinc oxide rotary kiln is the calcination equipment used for processing the zinc-bearing materials to get the zinc oxide. The zinc oxide rotary kiln manufactured by ZK Corp. is specialized used and designed for the production of zinc oxide, as the zinc oxide exists in powdery. Because the zinc oxide is very fine powder, so we have to make a special rotary kiln for zinc oxide production, that is what we say now “zinc oxide rotary kiln”.
Zinc Oxide Rotary Kiln Application:
Mainly used in building materials, metallurgy, chemical, refractory
materials, environmental protection industries, chemical products -
water zinc sulfate, zinc sulfate heptahydrate, refractories, the
zinc oxide is the main raw materials for the production of
steel-making zinc ball. For Building construction, it is widely
used in the production for containers, fire board, arts and crafts,
vegetable greenhouses, wall insulation board, activity board,
asbestos etc. Because of good adsorption, low melting point, so it
is also used for paint coatings refractory bricks, magnetic
materials, ceramics, rubber tires etc.
Working Principle of Rotary Kiln:
Zinc oxide rotary kiln working principle is the whole process and
principles of the calcined zinc, zinc-containing materials.
Generally it adopts the zinc oxide rotary kiln to process of the
zinc-containing filter cake. The zinc in the filter cake mainly
exists in the form of zinc ferrite, oxide and sulfate. Under the
high temperature in the rotary kiln, the zinc ferrite and solid
carbon will produce the reaction for oxide-reduction, then it will
get the zinc, at the same time lead and cadmium sulfate also be
reduced, will volatilize in the form of sulfide and gold bucked
out. The reduced and volatilized metal from the solid phase will be
re-oxidation, and finally will be produced in the form of oxide.
Note: The amount of air into the zinc oxide rotary kiln should
ensure that the flue gas has sufficient oxygen to re-oxidize all
the metal vapor, sulfide and carbon monoxide. Increasing the amount
of air in the zinc oxide rotary kiln will increase the recovery
zone to the feed end. On the contrary reducing the amount of air,
the reduction area is shortened and the starting section of the
reduction zone extends toward the discharge end.
Zinc oxide rotary kiln is composed of kiln body, rolling ring,
support roller and support roller shaft, thrust roller,
transmission device etc.
【Kiln body】: Zinc oxide kiln body generally is welded (or riveted)
by 20 mm thick steel plate into a cylinder.
【Rolling ring】: Rolling ring is not directly covered on the kiln
body, but mounted on the kiln body through the base plate, its
function is to strengthen the zinc oxide rotary kiln body,
meanwhile,it can transmit the weight of the cylinder to the thrust
roller. For the zinc oxide rotary kiln which is used for the
production of refractories, it normally has 5 to 8 rolling rings.
【Support roller and support roller shaft】: The support roller is
mounted on the support roller shaft by means of a hot assembly, and
the support roller shaft is mounted into two bearings which have
bronze bushings. The water temperature used for bearing after
cooling is not more than 25 degrees.
【Catch roller】 : The catch roller is a limiting device that limits
the position of the zinc oxide rotary kiln on the support roller,
but it does not prevent the body from moving up and down.
【Transmission device:】 Zinc oxide rotary kiln is generally used to
drive the rotation of the gear
Our Advantages of Mineral Raw Material Rotary Kiln:
1. Zinc oxide rotary kiln has simple configuration, it can reduce
the investment costs and improve productivity.
2. Zinc oxide rotary kiln has high beneficiation efficiency, and it
can produce good quality zinc oxide by the calcination process, and
this kiln has less nodulation.
3. The entire zinc oxide production line has smooth operation and
large production capacity, in the smelting process, it can also
greatly reduce the fuel cost.
Rotary Kiln Specifications:
Model | Kiln body size | (t/h) Capacity | (r/min) Rotate speed | (kw) Motor power | Weight | Note | ||
Dia (m) | Length(m) | Slope (%) | (t) | |||||
φ1.4×33 | 1.4 | 33 | 3 | 0.9-1.3 | 0.39-3.96 | 18.5 | 47.5 | ---- |
φ1.6×36 | 1.6 | 36 | 4 | 1.2-1.9 | 0.26-2.63 | 22 | 52 | ---- |
φ1.8×45 | 1.8 | 45 | 4 | 1.9-2.4 | 0.16-1.62 | 30 | 78.2 | ---- |
φ1.9×39 | 1.9 | 39 | 4 | 1.65-3 | 0.29-2.93 | 30 | 77.59 | ---- |
φ2.0×40 | 2 | 40 | 3 | 2.5-4 | 0.23-2.26 | 37 | 119.1 | ---- |
φ2.2×45 | 2.2 | 45 | 3.5 | 3.4-5.4 | 0.21-2.44 | 45 | 128.3 | ---- |
φ2.5×40 | 2.5 | 40 | 3.5 | 9.0-10.5 | 0.44-2.44 | 55 | 149.61 | ---- |
φ2.5×50 | 2.5 | 50 | 3 | 6.25-7.4 | 0.62-1.86 | 55 | 187.37 | ---- |
φ2.5×54 | 2.5 | 54 | 3.5 | 6.9-8.5 | 0.48-1.45 | 55 | 196.29 | ---- |
φ2.7×42 | 2.7 | 42 | 3.5 | 10.0-11.0 | 0.10-1.52 | 55 | 198.5 | ---- |
φ2.8×44 | 2.8 | 44 | 3.5 | 12.5-13.5 | 0.437-2.18 | 55 | 201.58 | |
φ3.0×45 | 3 | 45 | 3.5 | 12.8-14.5 | 0.5-2.47 | 75 | 210.94 | ---- |
φ3.0×48 | 3 | 48 | 3.5 | 25.6-29.3 | 0.6-3.48 | 100 | 237 | |
φ3.0×60 | 3 | 60 | 3.5 | 12.3-14.1 | 0.3-2 | 100 | 310 | ---- |
φ3.2×50 | 3.2 | 50 | 4 | 40.5-42 | 0.6-3 | 125 | 278 |
Henan Zhengzhou Mining Machinery Co., Ltd has become an integrated
modern enterprise with scientific research, design, development,
manufacturing, sales, installation, commissioning and training
services.
The main products of company include: ball mill, rotary kiln,
vertical preheater, cooler, crusher, metallurgical coke oven,
magnetic separator, flotation machine, classifier, feeder, bucket
elevator, preheater, dust collector, elevator, drier, and other
equipments relate to metallurgy, cement, lime, mineral processing,
refractory, chemical industry. The products of Henan Zhengzhou
Mining Machinery Co., Ltd have been sold to every province of China
and exported to Russia, Korea, Vietnam, Malaysia, Nepal,
Bangladesh, Mexico, Armenia, Africa, South America and other
countries and regions. At present, Henan Zhengzhou Mining Machinery
Co., Ltd is the largest equipment supplier for magnesium production
and has been on the leading position for 25 years in the market.
We have advanced production technology and management. Our professional engeneers and after-sales groups production technology can offer convienient service for our customers.