Simple Structure Bronze Copper Seal Ring Convenient Use And Maintenance

Simple Structure Bronze Copper Seal Ring Convenient Use And Maintenance

Production Feature

1. The sealing ring shall have good sealing performance within the working pressure and certain temperature range, and can

automatically improve the sealing performance with the increase of pressure.

2. The friction between the sealing ring device and the moving parts shall be small and the friction coefficient shall be stable.

3. The sealing ring has strong corrosion resistance, is not easy to age, has long service life and good wear resistance, and can

compensate automatically to a certain extent after wear.

4. Simple structure, convenient use and maintenance, making the sealing ring have a longer life

Precautions for installation and use of sealing ring:

(1) Do not install the wrong direction or damage the lip. If there are more than 50 μ m scars on the lip, it may cause obvious oil leakage.

(2) Prevent forced installation. It is not allowed to use a hammer to drive in, but to use a special tool to press the sealing ring

into the seat hole first, and then use a simple cylinder to protect the lip through the spline part. Before installation, apply some

lubricating oil to the lips to facilitate installation and prevent burns during initial operation. Pay attention to cleaning.

(3) Prevent overdue use. The service life of the rubber seal of the dynamic seal is generally 3000-5000h, and the new seal ring

should be replaced in time.

(4) The size of replacement seal ring shall be consistent. The sealing ring of the same size shall be selected in strict

accordance with the requirements of the instruction manual, otherwise, the compactness and other requirements cannot be guaranteed.

(5) Avoid using old sealing rings. When using the new sealing ring, the surface quality shall also be checked carefully to make

sure that there are no defects such as small holes, bulges, cracks and grooves, and it can be used only after it has enough elasticity.

(6) During installation, all parts of the open hydraulic system shall be cleaned strictly first, and special tools shall be used to

prevent the fingers from being scratched by the sharp metal edge.

(7) When replacing the sealing ring, the groove of the sealing ring shall be strictly inspected, the dirt shall be removed and the

groove bottom shall be polished.

(8) In order to prevent oil leakage caused by damage, it is necessary to operate according to regulations, and at the same time

, it is not allowed to overload for a long time or operate the machine in a relatively bad environment

More details

Xinxiang Haishan Machinery Co., Ltd. specializes in the production and processing of copper parts. Since 2008 has focused on the R & D and production of copper castings and CNC equipment.

The main products are copper bush, copper bush, copper nut, large-scale copper casting, flange copper bush, large-scale shaft sleeve, taper broken copper sleeve, excavator copper sleeve, ball mill copper sleeve, copper wire nut, reducer copper worm gear, crusher copper sleeve, Simmons copper sleeve, Sandvik copper sleeve, mining equipment copper accessories, etc. more than 20 series, hundreds of models, copper alloy products a production unit has Advanced processing and mechanical testing equipment, in the region has a strong technical force and reliable quality..

The company has established a complete and scientific quality management system, and a complete quality inspection system for component testing, mechanical performance testing, etc.

Xinxiang Haishan Machinery Co., Ltd. has a mature R & D team. With 20 years of production experience, it takes customers' needs as the starting point and midpoint of technical R & D to provide customers with the best and most efficient product solutions, and has won a number of national patents.

Our company is good at producing copper parts of crusher, with 7 years of production, casting and processing experience. It is a new manufacturer specializing in the production of customized cone broken copper sets in Henan Province. Its products are exported to Germany, Russia, the United States, Bulgaria, Japan and all over China, the quality and technology of our products are highly praised by customers all over the world.