Horizontal Metal Cutting Band Saw Machine 4800*34*1.1mm Saw Belt Size

Brand Name:HEIYAN
Certification:CE/ISO
Model Number:HYBSM200225
Minimum Order Quantity:1set
Delivery Time:7-15days
Payment Terms:L/C, D/A, D/P, T/T, Western Union
Contact Now

Add to Cart

Active Member
Location: Cangzhou Hebei China
Address: Room 905, Building A of One World Business Center, Cangzhou, Hebei, China.
Supplier`s last login times: within 12 hours
Product Details Company Profile
Product Details

Horizontal Cnc Full Automatic Metal Cutting Band Sawing Machine


The friends who buy Huntsman horizontal band sawing machine products should strictly follow the following procedures:
1. Before operation, it is required to wear tight protective clothing, fasten the cuff, keep the lower part of the coat closed, and never wear gloves. It is not allowed to wear, take off or change clothes next to the moving machine tool, or wrap the cloth on the body to prevent the machine from being twisted. Safety helmet must be worn, braids should be put into the hat, and skirts and slippers are not allowed. A kind of
2. Make all preparations before starting the machine. Install the vise so that the sawing center is in the middle of the sawing stroke. The raw materials are placed horizontally on the vise and at right angles to the saw blade; if it is necessary to saw the bevel angle, first adjust the vise to the required angle, and the saw size shall not be greater than the maximum saw size of the machine tool. A kind of
3. The huntsman saw blade must be tensioned. Before sawing, the test run shall be idle for 3-5 minutes to blow out the air in the hydraulic cylinder and the oil grooves on the hydraulic transmission device, and check whether the sawing machine has any fault and the lubricating oil circuit is normal.

4. When sawing pipe or sheet section at the top, the tooth pitch shall not be less than the thickness of the material. When sawing, the handle should be back to the slow position and the feed amount should be reduced. A kind of
5. During the operation of the sawing machine, it is not allowed to change speed halfway. The sawing materials shall be placed, clamped and clamped firmly. The feed amount shall be determined according to the hardness of the material and the quality of the saw blade. A kind of
6. Special hydraulic oil and lubricating oil must be used in the hydraulic transmission and lubricating device. The coolant must be clean and replaced or filtered periodically.


TypeGZ 4235
Cut capcity W*H (mm)round 350
square 350*400
Bundle cutting W*H (mm)Max.350*230
Min.200*20
Saw belt size(mm)4220*34*1.1
belt line speed(m/min)40/60/80
Main generator power(kw)3
Hydraulic generator power(kw)0.75
Cooling generator power (kw)0.09
Working clamp styleHydraulic
Saw belt tighten styleHand
Main transmit structureTurbine
Loading styleExtra roller
Packing dimensions(mm) L*M*H2100*110*1500
Weights of machine (kgs)1970

China Horizontal Metal Cutting Band Saw Machine 4800*34*1.1mm Saw Belt Size supplier

Horizontal Metal Cutting Band Saw Machine 4800*34*1.1mm Saw Belt Size

Inquiry Cart 0