Skin Friendly Folding FFP2 Mask , FFP2 Filter Mask Anti Pollution

Skin Friendly Folding FFP2 Mask , FFP2 Filter Mask Anti Pollution

1 . Descriptions

FFP2 Respirator Mask with 4-ply non-woven/elasticated strap ,fold flat dust mask ,convenience take/packing: neutral color box, also can OEM/disposable dust mask with valve/protect against dust and liquid

Active carbon is better for odour and hot working condition.

2 . How to use?

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.
• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

​

3. Warning

• The user should be trained in the fitting and should be aware of the instructions for using prior to donning the respirator.
• Use in adequately ventilated areas,which are not deficiency of oxygen.
• Do not use this respirator when oxygen concentration is less than 19.5%.
• Do not use the mask in explosive environment.
• The mask must be fitted correctly to ensure the level of protection expected is achieved.
• The facila hairs or heards and certain facial charactrtistics may reduce the effectiveness of the mask.
• For mask mark marked “NR”,the particle filtering half mask shall not be used for more than one shift.

4. Discard and replace the mask if:

• The mask is removed whilst in the contaminated area.
• Clogging of the respirator causes breathing difficulties.
• The mask becomes damaged.
• For respirators protecting against vapours,the smell of vapours present becomes derectable.

We are one of leading manufacturers and exporter of personal protective equipments and medical consumables for more 10 years.

• Non woven series: Isolation gown,surgical gown,coveralls,lab coats,scrub suits,face mask,headwear,shoe covers,sleeve covers,bed covers,drapes,bed sheets,etc.
• Plastic series: PE apron,CPE gown,PE cap, PE shoe & sleeve covers,CPE bed matress,PE gloves,etc.
• Glove series: Surgical & exam gloves, protective glove,industrial gloves
• Urology series: Urinary bags ,catheters,ostomy bags,etc.
• Wound drainage system: drainage bottles,bulb reseviors, drainage sets,drain tube and needle,trocar,etc.

Quality is based on the national standard LD29-2006, GB/T2626-2006, GB2828-87, GB2829-87 and combined with the different standards in different countries. Have CE and FDA, client can also get FDA certificate to register our product.