Enclosed Industrial Conveyor Belts High Lifting Height 50-60HZ Frequency Energy Saving

Advantages and Features

1. No spillage with steep angle conveying,long lifespan
2. Larger production grain sizes can be handled
3. Reduced energy consumption to save money for you
4. Able to conveyor material at any angles up to 90 degree to save space for you
5. Higher conveyance capacity
6. Extremely high stability is provided in the traverse direction, good longitudinal flexibility
7. Low maintenance requirements
8. Hot vulcanization provides 5 times greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt.
9. Can be sealed and environmental friendly

Operation regulation and maintenance
1. Belt conveyor should be operated in according to design requirement.
2. Belt conveyors are not allowed to overload run.
3. Check wear condition of the belt, the damaged should be repaired.
4. Operators should circuit to inspect to close observe belt conveyor running. Especially,temperature rise and noise of main motor and the brake working whether they are normal; contact state of the brake and oil level, noise of gear unit and run off of belt should be noticed;temperature rise and noise of all bearings and state of all transition loads point should be noticed;
5. notice to see whether the hopper are blocked, working state of pulley, idler, belt cleaner, take-ups and control equipment.
6. Operators should make good record if any abnormal. The belt conveyor should be stoppe on emergency.
7. Periodic overall: Minor overall should be once every monthes besides ordinary maintenance Overhaul should be once half past year or once every year.

Introduction

Corrugated belt conveyor raised edge and large dip angle belt conveyor introduce belt with wavy raised edge and cross cleats,The machine is mainly used for conveying bulk materials in large inclination angle. The inclination angle can reach from 0° to 90°(the best angle is below 70°).