Movable Motorized Conveyor Belt , Coal Conveyor Belt Continuous Working
Brand Name:JINRUI
Certification:ISO/CE
Model Number:TD75
Minimum Order Quantity:1SET
Delivery Time:10-15 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
No.388 Heping Road, Xinxiang City, Henan Province,China
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Movable Motorized Conveyor Belt , Coal Conveyor Belt Continuous Working
1. Brief Introduction
Belt conveyor consists of two or more pulleys, with a continuous
loop of material - the conveyor belt - that rotates about them. One
or both of the pulleys are powered, moving the belt and the
material on the belt forward.
2. Main function and scope of application
It is suitable for transporting bulk materials or box bags in coal,
metallurgy, mining, chemical industry, building materials, docks,
warehouses, construction sites, etc. it is especially suitable for
use in chemical fertilizer plants, cement plants and other
environments requiring manual loading, saving a lot of personnel.
3. Product characteristicsThe working principle of the mobile belt conveyor is the same as
that of the common belt conveyor. It uses the belt as the
continuous transportation equipment of the traction bearing
machine. Compared with the common belt conveyor, it increases the
mobile device and so on. Because of the more mobile devices, the
mobile belt conveyor increases the superior maneuverability. It can
be driven or pulled by the forklift and other power locomotives
according to the site conditions Load and unload the goods at a
suitable place.
4. More attention:
1. During the installation, pay attention to the assembly
dimensions of all parts of the fuselage and keep the straightness
of the whole machine.
2. Tighten bolts when installing bolt fasteners.
3. The center line of the belt at both ends shall be aligned when
making the belt joint to prevent the belt from running off.
4. When installing the protection part of the electric appliance,
be careful to prevent damage.
5.Maintenance and repair
5.1 under normal conditions, the conveyor is required to start
without load and avoid short-time starting.
5.2 it is necessary to check whether there is oil leakage in the
reducer regularly, and whether the regular oil filling volume is in
conformity with the construction in time
Correct and supplement.
5.3 if there is squeal at the driving drum, it means that the belt
is slipping. Check whether the belt is tensioned.
5.4 the belt joint shall be inspected frequently, and the damaged
parts shall be cut and redone in time, and the damaged parts shall
be protected during redoing
6. Tech data
| Main technical parameters | |||||||
| Bearing roller form | Bend speed | Bend width(mm) | |||||
| (m/s) | 500 | 650 | 800 | 100 | 1200 | 1400 | |
| Conveying capacityQ(m3/h) | |||||||
| Through roller | 0.8 | 78 | 138 | - | - | - | - |
| 1.0~2.5 | 97~232 | 164~391 | 278~661 | 435~1033 | 655~1556 | 891~2118 | |
| 3.15 | - | - | 821 | 123.3 | 1858 | 2528 | |
| 4 | - | - | - | - | 2202 | 2996 | |
| Flat roller | 0.8 | 41 | 67 | 118 | - | - | - |
| 1.0~2.5 | 52~125 | 88~211 | 147~350 | 230~546 | 345~821 | 467~1117 | |
| Power (kw) | 1.5~40 | 1.5~50 | 2.2~75 | 4~100 | 7~185 | 4~185 | |
7. Packing Details:
1, Outer packing is plywood case, which is up to the international
standards.
2, Inner packing is Moisture-proof and water-proof membrane.
3, All of package are wrapped by 0.5mm steel belt to further
strengthen.
♦ Bulk Density: _____t/m3
♦ Particle distribution percentage:____________
♦ Material temperature: _____℃; (please check the following example to help you
♦ water content:____% understand it.Supposing the layer number is 2
♦ Material is corrosive or not: ____ (Ps. Yes or No) and the aperture size of each layer is 10mm and 5mm,
♦ Material is sticky or not: ____ (Ps. Yes or No) then you will get 3 kinds of products: X,Y and Z.
♦ Working environment is indoor or outdoor: _____ X≥10mm; 5mm≤ Y < 10mm; Z<5mm.
♦ Working environment temperature: ______ ℃ We want to confirm the following information:
♦ Particle distribution percentage:____________
♦ Material temperature: _____℃; (please check the following example to help you
♦ water content:____% understand it.Supposing the layer number is 2
♦ Material is corrosive or not: ____ (Ps. Yes or No) and the aperture size of each layer is 10mm and 5mm,
♦ Material is sticky or not: ____ (Ps. Yes or No) then you will get 3 kinds of products: X,Y and Z.
♦ Working environment is indoor or outdoor: _____ X≥10mm; 5mm≤ Y < 10mm; Z<5mm.
♦ Working environment temperature: ______ ℃ We want to confirm the following information:
Movable Motorized Conveyor Belt , Coal Conveyor Belt Continuous Working
Inquiry Cart
0