Conveyor Spare Parts Bearing Belt Conveyor Carrying Rollers
Brand Name:JINRUI
Certification:ISO/CE
Model Number:108mm
Minimum Order Quantity:20 SET
Delivery Time:10-15 working days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Active Member
Location:
Xinxiang Henan China
Address:
No.388 Heping Road, Xinxiang City, Henan Province,China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
Conveyor Spare Parts Bearing Belt Conveyor Carrying Rollers
1. Brief Introduction
Carrying Roller is the most important part of the belt conveyor, and it is also the
most important part of the belt conveyor. The Carrying Roller is different from the unpowered roller used for material
transportation, although the composition and appearance are
approximately the same. However, the carrying capacity of the belt
conveyor idler roller is relatively large, and there are
corresponding restrictions on the speed.
2. Classification
Trough upper roller
The standard trough angle of the upper trough roller is 35 degrees, so the 35 degree trough roller and the 35 degree trough forward tilt roller are the most used in each conveyor.
Impacting roller
The impacting roller has 35 degrees and 45 degrees. When the canvas conveyor belt is selected, the 35 degree trough buffer roller can only be used. When using a 45-degree trough-type buffer roller, you can use a 45-degree trough-type roller in the section where the guide trough is not impacted by the material
Transition roller
Conveyors with large capacity, long distance, high belt tension, and important conveyors should generally be equipped with transition sections.
Return roller
The return roller is also called the parallel lower roller, and it is also the most used lower roller.
Self-aligning roller
Self-aligning rollers include ordinary self-aligning rollers, friction self-aligning rollers and tapered self-aligning rollers. The self-aligning roller is used to automatically correct the excessive deviation of the conveyor belt during operation to ensure the normal operation of the conveyor.
3. Product characteristicsThe standard trough angle of the upper trough roller is 35 degrees, so the 35 degree trough roller and the 35 degree trough forward tilt roller are the most used in each conveyor.
Impacting roller
The impacting roller has 35 degrees and 45 degrees. When the canvas conveyor belt is selected, the 35 degree trough buffer roller can only be used. When using a 45-degree trough-type buffer roller, you can use a 45-degree trough-type roller in the section where the guide trough is not impacted by the material
Transition roller
Conveyors with large capacity, long distance, high belt tension, and important conveyors should generally be equipped with transition sections.
Return roller
The return roller is also called the parallel lower roller, and it is also the most used lower roller.
Self-aligning roller
Self-aligning rollers include ordinary self-aligning rollers, friction self-aligning rollers and tapered self-aligning rollers. The self-aligning roller is used to automatically correct the excessive deviation of the conveyor belt during operation to ensure the normal operation of the conveyor.
3.1. The trough roller has high hardness, strong wear resistance, and is not easy to damage
3.2. The sealing performance is good, the trough roller is fully sealed, and the two ends are equipped with plastic sealing rings, so the grease will not leak.
3.3. The surface of the trough-shaped roller is smooth, does not adhere to the material, and has a small friction coefficient in contact with the conveyor belt, which reduces the driving force of the winch
3.4. The trough roller is corrosion-resistant, and neither acid, alkali, nor salt has any effect on it
3.5. Long service life, 2-5 times the service life of steel roller
3.6. Low operating costs and good economic benefits
4.Tech data
| Material | steel, nylon, stainless steel, PVC, UHMWPE, HDPE | |||
| Bearing Model | 620,462,056,305,630,000,000,000 | |||
| Bearing Brand | HRB, LYC, ZWZ,SKF, NSK,C&U | |||
| Working Life | ≥30000 hours | |||
| Roller Pipe | Q235/carbon steel | |||
| Diameter | 89/102/108/114/127/133/140/152/159/165/178/194/219 | |||
| Length(mm) | 190mm-3500mm(National and non-standard idlers) | |||
| Belt Width | B450mm to B2200mm | |||
| Seal | Multiple labyrinth seal, water proof, dust proof | |||
| Standard | GB/CEMA/JIS/DIN/Australia | |||
| Special | can be customized according to customer or design for customer | |||
| Supply Ability | 1000pcs per day | |||
| Certificate | ISO9001,SGS | |||
| Application | recycling industry | |||
| power industry | ||||
| parcel transport industry | ||||
| petro industry | ||||
| coal mining industry | ||||
| cement concrete industry | ||||
| machining industry | ||||
5. About us:
Xinxiang Jinrui Machinery Factory is located in Xinxiang city, Henan province ,China. In 1999 year, our company was known as Xinxiang county mechanical and electrical equipment factory and we changed the company name as Xinxiang Jinrui Machinery Factory in 2001 year. Our company has 3000 square meters of standardized production workshop. Company has developed into a set design, development, production, manufacturing, sales in the integration of high-tech enterprises.
Our company has passed CE , ISO9001 quality management system certification and has professional technical team, sales team and production team. We supply our professional service with CAD & 3D design.
Main products: Our main production: Belt conveyor machine, sidewall belt conveyor, enclosed belt conveyor, inclined belt conveyor, troughed belt conveyor, U trough screw conveyor, tubular screw conveyor, reversible belt conveyor,impeller feeder, vibratory feeder, movable belt conveyor,circular vibrating sieve,small vibrating screen,heavy duty belt conveyor;
Conveyor Spare Parts Bearing Belt Conveyor Carrying Rollers
Inquiry Cart
0