

Add to Cart
Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint Powder Coating
Product Overview of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint
Powder Coating:
The stainless steel rotary vibrating filter sieve for paint powder
coating is also well known as the 450 type filter sieve. It is a
kind of small vibrating filter which is easy to move, high
efficiency, low noise and small volume. It is especially suitable
for powder screening and slurry filtration with less impurity
content. The 325 mesh screen filter paint with a specific gravity
of 1.1 can reach 1200 liters per hour, and the 30 mesh screen can
handle 700 kilograms per hour flour. It has an excellent filtration
performance for ceramic uranium material.
Structural Features of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint
Powder Coating:
1. It is convenient to remove and change the screen by using the
internal V-type screen pressing way.
2. The upper screen frame can be easily removed, and it is very
convenient to pour off impurities that do not pass through the
screen.
3. The material is directly discharged. There is no dead angle in
the screen machine, and no secondary pollution is generated.
4. A waterproof cover is added to prevent electricity from water.
5. A nylon brake wheel can be added for easy movement.
Working Principle of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint
Powder Coating:
The 450mm filter sieve machine adopts a new type of vertical
vibration motor as the vibration source. The upper and lower ends
of the vertical vibration motor are equipped with eccentric
weights, which can generate horizontal, vertical and inclined
three-dimensional motion. The exciting force is transmitted to the
screen frame and materials through the receiving pan to achieve an
excellent grade. By adjusting the phase angle of the upper and
lower eccentric weight hammer, the movement track of the material
on the screen surface can be changed to ensure the full grading of
the material.
Product Advantages of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint Powder Coating:
1. Small volume, low noise, easy to move, the discharge port can be
arranged along the circumferential direction.
2. High screening accuracy and high efficiency, can be used in any
powder, granule or mucus.
3. Fully enclosed structure, the powder is not flying, the mesh is
not blocked, and sieving powder can reach 400 mesh.
4. It is easy to replace the screen, easy to operate and easy to
clean.
5. There are no special requirements for the equipment foundation,
and the general cement floor can be used directly.
6. The machine is equipped with mesh anti-blocking device, which
can effectively eliminate the blockage of the mesh.
7. The mixed materials enter from the center. After sieving, the
materials of various particle sizes are automatically and
continuously discharged from the respective outlets, which can
realize continuous production.
Technical Parameters of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint Powder Coating:
Name | Diameter | Power | Noise | Dimensions | Voltage | Amplitude |
Data | 450mm | 0.18 KW | ≤50dB | 460*550*665mm | 380V or 220V | 2~5mm |
Structural Composition of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint
Powder Coating:
AAREAL 450 type vibro sifter consists of the body, vibrating motor,
hopper, screen frame, electronic control unit etc. The machine
adopts a new type of vibration structure with stable vibration and
high efficiency. The screen frame is easy to operate, easy to
clean, and easy to replace the screen. This machine has the
advantages of novel appearance, reasonable structure and easy to
operate, and is more suitable for occasions where the working place
is frequently changed.
Screen Replacement of Stainless Steel Noiseless Rotary Vibrating Filter Sieve for Paint
Powder Coating:
When you want to replace the screen, first remove the screen frame
from the receiving pan, loosen the bolts, remove the broken screen,
and then spread the new screen on the screen frame, and put the
screen holder, and draw it around (avoid being too tight), leave a
centimeter along the mesh ring, put on the bolts and tighten, and
finally cut off the excess screen.
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com