Product Details
FFP1V Save Mask ,Valved Dust Mask ,Disposable Face Mask With CE
Certificate
1 . Descriptions
FFP1V Dust Mask has filtering facepiece particulate respirator -
Collapse resistant shell for increased durabilty - Compatible with
a variety of protective eyewear and hearing protection - Adjustable
noseclip helps provide a custom and secure seal - Two-strap design
helps provide a secure fit.
2 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP
3 . Material of each layer
Outer layer : Protective PP spun-bonded non-woven
Middle layde : FFP1 melt blown filter(have filter efficiency level
of 80%)
Inner layer : Shaped needle punched cotton
4 . Directions for use
- The mask is only for single use .
- The mask should't be removed from its packaging until its required
for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
- If maintained as per storage instructions , product can be used up
to 5 years from date of manufacture.
5 . Recommended applications include:
• Cutting and Casting of Metals
• Disposal of Toxic Waste
• Iron and Steel Industry
• Laboratory and Disease Control
• Manufacture of Batteries
• Pharmaceutical industry
• Textile industry
• Underground Civil Engineering
• Woodworking
• Welding work
6 . More pictures
Company Profile
Our company has a core team with more than ten years of packaging
design and manufacturing experience, providing Disposable Dust
Mask, FFP1 Dust Mask, FFP2 Dust Mask, Carbon Filter Dust Mask, Anti
Pollution Dust Mask, Surgical Dust Mask, Disposable Surgical Mask,
Pharmacy Surgical Mask, Dust Respirator Mask, Respirator Filters
Mask, Foldable N95 Mask, Fine Particle Dust Mask, Dust Mask With
Valve and so on.

