600Wh Inverter Solar Generator Portable Power Station LiFePO4 Battery For Camping
Brand Name:Rydbatt
Certification:FCC, CEC, PSE, RoHS
Model Number:T600-EU/CH/UK/JP
Minimum Order Quantity:Negotiable
Delivery Time:30-45 work days
Payment Terms:D/P, T/T,
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Building C,Huaming Industrial park,Huaming Road, Dalang, Longhua,Shenzhen,Guangdong,China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
600Wh Inverter Solar Generator Portable Power Station Explorer with
Camping LiFePO4 battery 2000 cycle times
Renewable solar energy generator - This off-grid portable power
station provides 300 watt-hours of power storage. Create a solar
power station generator by combining with a 60W solar panel, the
built-in MPPT feature enables optimized and infinite clean energy
for use anytime/anywhere there is sunlight.
Portable power source – An ideal mobile power source for outdoors
adventures or as a backup emergency power, The battery power
station is long lasting and provides 5 times the lifespan of
typical power stations on available due to the enhanced electrode
chemistry.
Portable and user friendly design – Great for outdoor camping and
RVs, power station includes various features that make it compact
and easy-to use; a large easy-to-read LCD display to see the power
station status, a sturdy handle for carrying, built-in LED light
for ambient lighting, and cell phone compartment.
Versatile power outputs - Power up to 8 devices at the same time
with 2x 110V AC outlets with 200W output, 2x USB ports, 1x USB-C
45W PD port, 1x 12V car port and 2x DC barrel port.
Quality – portable power station is powered by Phosphate based
chemistry (LiPO4) technology and includes a built-in battery
management system that protects against overloading, over
discharging, overcharging, overheating, and short circuits.
Certified by FCC, CEC, PSE, and RoHS; includes 2 years warranty
from Tenergy.
- DC INPUT + PD INPUT/OUTPUT )
| DC INPUT | ||||
| Item | Min | Type | Max | Remark |
| Rated Input voltage | 10V | 15V | 25V | Whichever Non load or loading |
| Rated Input current | - | 3A | 3.5A | |
| Rated Input power | 45W | Automatic adjustment according input power | ||
| Ripple voltage of charging | - | - | 200mV | Test from the Input connector, oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor |
| Input over-current protection | - | - | - | |
| Input Lower-voltage protection | - | - | 5V | |
| Input over-voltage protection | 25V | - | 27V | The devices will stop charging If the Input voltage exceed the protection voltage |
| Input port short-circuit protection | - | - | - | Stop charging, components no damage |
| Input polarity reverse protection | - | - | - | Support(not charging if input polarity reverse) |
| Input adapter compatibility | 10-15 VDC | |||
| Solar panel charging | 18-24V with mppt function | |||
| Pass through function | The device can support discharging while the product is charging; the Type-C Output power will drop down to 36W if the product charging via DC Input port. | |||
| LCD display of charging | Display the charging power and battery capacity | |||
| Battery charging suggestion |
| |||
| Min | Type | Max | Remark | |
| Output voltage range | -5% | 12.0V | +5% | Constant Voltage Output |
| Output current | - | 10A | - | 2*DC 5521 port and 1*Car port total output power |
| Output Power | - | 120W | - | |
Output ripple | - | - | < 200mV | Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading |
Discharging efficiency | >92% | - | - | Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end. |
| Over current protection | 11A | - | 13A | |
Short circuit protection | - | support | - |
- DC (5521)Output features
| Min | Type | Max | Remark | |||
| Output voltage range | 10.8V | 12.0V | 14.6V | |||
| Allowable output current | - | 10A | - | |||
| Allowable output power | - | 120W | 146W | |||
| output current | - | 10A | 12A | CV 12V test | ||
| Output ripple | - | - | < 150mV | Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, the ripple < 800mV while AC Output loading | ||
| Discharging efficiency | >92% | - | - | Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end. | ||
| Limited current protection | 10A | - | 13A | The output will turn off if the output current is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button. | ||
| Output over-voltage protection | 15V | - | 16.8V | The output will turn off when | the product | |
| doesn't work properly and the output | ||||||
| voltage is exceed specified value. | ||||||
| Short circuit protection | - | support | - | The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button. | ||
- USB1&2 Output features
| Item | Min | Type | Max | Remark | ||||
| Output voltage range | 4.75V | 5V | 5.25V | |||||
| Allowable output current | - | 2.4A | - | |||||
| Allowable output power | 12W | |||||||
| CC Output | 2.1 | 2.4 | 2.5A | CV 4.75V Test model | ||||
| Output ripple | - | - | < 150mV | Rated load,oscilloscope Bandwidth setup as 20MHZ, parallel with 10uF and 0.1uF capacitor, | ||||
| Discharging efficiency | >92% | - | - | Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end. | ||||
| Limited current protection | 2.5A | 3A | The output will turn off if the output current is exceed specified value; | |||||
| Output over-voltage protection | 6.2V | - | 6.8V | The output will turn off when | the product doesn't | |||
| work properly and the output voltage is exceed | ||||||||
| specified value. | ||||||||
| Short circuit protection | - | suppor t | - | The output will turn off if the output port is short circuit by wire or external devices; the product will be automatically recovery work normally | ||||
| after cutoff the loading. | ||||||||
| Item | Min | Type | Max | Remark |
- AC Sine wave output features:
| Item | Min | Type | Max | Remark |
| Output voltage range | 200V | 220V | 240V | |
| Rated output current | - | 0.9A | - | |
| Rated output Power | 200W | |||
| Output frequency | 47 Hz | 50 Hz | 53Hz | |
| Non-loading current | 600mA | |||
| Discharging efficiency | >85% | - | - | Test requirements: test 4 model average efficiency of 25% 50% 75% 100% of full load; test at PCBA board end. |
| Over loading protection | 220W | - | 300W | The output will turn off if the output power is exceed specified value; the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button. |
| Over temperature protection Of AC board | 80℃ | - | 100℃ | Tthe output will turn off, the product can be recovery work normally after temperature down and press the key button |
Over temperature recovery Of AC board | 70℃ | - | 80℃ | |
| Fan start | 55℃ | 65℃ | ||
| Fan stop | 45℃ | 55℃ | ||
| Short circuit protection | - | suppor t | - | The output will turn off and the LCD blink display AC ! while Key’s LED blinking and buzzer is ringing 3 times. The product will recover work normally after cut off the loading and press key button. |
Remark: the fan will stop runing if the the AC board was temperature protection.
- Automatic power off parameter:
| Item | Min | Type | Max | Remark | |
| USB1 turn-off current | - | 80 mA | 100 mA | ||
| USB2 turn-off current | - | 80 mA | 100 mA | ||
| DC turn-off current | - | 50mA | 80 mA | ||
| AC turn-off power | - | 3W | 4W | ||
| TYPE-C turn-off current | 50mA | 80mA | |||
| LED light turn-on | - | - | - | The automatic will be not available while LED light is turn on. |
Remark:
- Above parameter value only specified for each one port, the connect more than one port, the turn-off current will count all the port of current.
- The default setting is turn-on the automatic power off function,the user can press the DC + AC key button for 3S, the buzzer short ringing 2 times, the automatic power off function will be turn-off; press the DC + AC key button for 3S again, the buzzer long ringing 1 time,the automatic power off function will be recovery work normally;
- The automatic power off function also be recovery work normally after re turn-on the product After turn off the product ≥10S.
3.5 LED light function:
| LED Current | - | 150mA | 250 mA | |
| LED Voltage | - | 18V | 21V | |
| LED Power | - | 3.6W | 5.25W | |
| Lamp color temp. | - | 4500K | - | |
| Lamp qty. | 12 |
4.Battery features:
| No. | content | Testing method | Remark |
| 1 | Charge cut-off voltage | 13.8V | |
| 2 | Discharge cut-off voltage | 8.8V | |
| 3 | Standard charge | Under the condition of the ambient temperature of 25±2℃, Charge the battery at constant current of 0.2C to reach 13.8V. Then charge the battery at constant 13.8V voltage until the charging current decreasing to 0.02C. | |
| 4 | Standard discharge | After the standard charging,rest for 1 hour then discharge to 8.8V@0.2C. | |
| 5 | Shipments voltage | Quantity of electricity≤30 % | |
| 6 | Maximum Charge Current | ≤12A | |
| 7 | Maximum continuous working current | ≤30A | Instantaneous current≤ 60A time≤2S |
| 8 | Rated capacity | Typical capacity:250000mAh Minimum capacity:24600mAh-5% | standard discharge after standard charge |
| 9 | Operation temperature range | charge:0~40℃ | humidity:60±25% 60±25%R.H |
| discharge:-10~40℃ | |||
| 10 | Storage temperature | ≤1 month: -20 ~ 45℃ | 60±25%R.H Best 10~25℃ for |
| ≤3 months: -10 ~ 30℃ | long-time storage | ||
| ≤1 year: 0 ~ 30℃ | |||
| 11 | Impedance | <80mΩ | |
| 12 | Weight | Approx:≈2400g |
5.Environment features:
| LCD Function | Over temperature warning, display the AC ! and buzzer ringing 3 times when temperature protection action |
| Display current total charging power, discharging power. | |
| The key button’s LED blinking during abnormal of AC i protection action | |
| LED function | key button with LED |
| Discharge compatibility | The specified devices can be quick charge available. |
| Working temperature | Charging: 0-40 °C Discharging: -10-40 °C |
| Storage temperature | -20 ~ 45℃ |
| Working Humidity | 20-90%RH |
| Storage Humidity | 10-95%RH |
- Safety features:
6.1:ESD features:
| ESD |
| Contact Discharge +/-4kv, Normal recovery function allowed Air Discharge +/-8kv, Normal recovery function allowed |
- Dielectric Strength :
Dielectric Strength (Hi- pot) | Inverter output L/N VS DC Input | 3000VAC 50Hz/10mA(Max)/60 Second, No breakdown and flashover |
Delivery Time:
- Material Preparation Time: 7-15 days (or inventory)
- Production & Assembly Time 3-10 days
- Testing & Packaging Time: 2-10 days
- Total Delivery Time: 30-45days
- The faster delivery could be negotiable.
Factory photo:
Contact with our sales team for your OEM and ODM order.
OEM/ODM Service:
If you want to display your own brand logo in products, bags,
labels or anywhere. Or you need to develop battery packs according
to your product orientation. Our OEM and ODM services are ready to
do it.
Packing:
According to Stardard Export Packing.
Carton box, wooden box, wooden pallet
Ryder Electronics established in Shenzhen on July 18, 2005, mainly
in the business of battery packs. In 2009 the company passed
ISO9001 and improved the product quality standard to fulfill the
high-end requirements from our customers.
In 2012, Ryder Electronics moved to a new facility and expend the
production capacity, the Productivity improved nearly 10 times than
before.
In 2013, Ryder Electronics imported ERP (SAP) system to supervise
order execution process.
In 2017, Ryder Electronics expanded the SMT, imported high-speed
patch machine from Germany.
Until now the factory grows into a modern enterprise which
integrated injection molding, PCB designing, SMT and battery pack
assembling services.
In 2018 the company passed ISO14001certification, introduced
automated battery production line to further improve the production
quality and capacity.
600Wh Inverter Solar Generator Portable Power Station LiFePO4 Battery For Camping
Inquiry Cart
0