

Add to Cart
Parking Lift Strong Structure (I-Beam & C-Channels) With Independent Platforms
●Strong Structure (I-beam & C-channels) with independent platforms
●Special platform profile with galvanized wave plates and tire stoppers.
●Customized design with multiple vertical levels (2-6) and
multiplehorizontal bays (3-6).
●Top level platforms move vertically (Up & Down) only through
geared motors & lifting chains.
●Lower level platforms slide horizontally only through geared
motor& guide rails.
●Middle levels platforms move vertically & slide horizontally.
Each platform (except for lower level) is equipped with four safety
hookdevices to prevent falling, collision and overload.
●Photo electric sensors to stop the unit when cars park improperly
or when personsaccidentally cross in.
●Operation panel equipped with Emergency stop, manual keyboard &
screenwith lC card reader.
●PLC device mounted inside electric panel to control the
parking/retrieving process.
●The standard finishing is hot dip galvanized but can be in powder coated too.
Model | SN-POP25/2(5 cars) | SN-PSH25/2(7 cars) |
Vehicle Size | ≤5000x1950x1800mm | ≤5000x1850x1800mm |
Lifting capacity | 2500kg | 2500kg |
Installation Dimensions | 7695x5690x4050mm | 9750x5690x4050mm |
Operation System | Integrated Gearmotors Driven+Roller Chains | |
Lifting/Sliding Motor | 2.2Kw/0.2Kw | |
Operation Mode | Keyboard/IC card/Manual | |
Lock release | Electromagnetic lock(hook) release | |
Voltage | 220v/380v/50Hz-60Hz/1Ph-3Ph |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.