RMS 1000W PEAKPOWER 2000W suboofer 12inch balcksteelbasket dual 4 ohms and dual 2ohms car woofer

The CR21-12D4 subwoofer was designed to redefine the term "daily" subwoofer, both in terms of power output and acoustic responsiveness across the entire low end frequency range. The engineering considerations that went into developing this 12-inch subwoofer are extensive, and contribute to why the CR21 series has continued to be one of the most popular subwoofer lines we have ever released.

Featuring a 2.5" 4-layer high temperature copper voice coil, the CR21-12D4 can operate at peak performance for hours on end with the peace of mind knowing that it can handle the brutality. Combine that with the top-tier, high flux ferrite motor of this driver, and it is by no surprise that this subwoofer can reproduce low end bass frequencies with authority. Furthermore, we integrated a unique black nomex spider suspension system into the design that utilizes the perfect blend of stiffness and flexibility. The aforementioned components of the CR21 as well as its advanced air flow cooling design, are what ultimately allow for the incredible responsiveness & power handling of this subwoofer.

• 12-inch Dual 2 Ohm Voice Coil Configuration
• Peak Power: 2000 Watts
• RMS Power: 1000 Watts
• Competition Grade Pressed Paper Cone
• High Roll Foam Surround
• Advanced Air Flow Cooling System
• 2.5" High Temperature Copper Voice Coil
• Motor Weight: 97 oz
• Frequency Response: 22 - 300 Hz
• Sensitivity: 84.7 dB
• Fs: 32 Hz
• Re: Dual 2 Ω
• Qms: 6.76
• Qes: 0.58
• Qts: 0.53
• Mms: 249.4 gr
• Nref: 0.185%
• Cms: 0.11 mm/N
• Bl: 16.67 n/a
• Vas: 36.2 L
• Sd: 471.4 cm²
• Xmax: 13.5 mm

• Recommended Sealed Volume: 1.00 ~ 1.25 ft³
• Recommended Ported Volume: 1.75 ~ 2.00 ft³
• Recommended Port Area: 25.0 in²
• Recommended Tuning Frequency: 34 ~ 36 Hz
• Enclosure recommendations above do not include subwoofer, bracing, and port displacement

• Cut-out Diameter	11.20"
  Mounting Depth	6.47"
  Total Height	7.63"
  Outside Diameter	12.35"
  Magnet Diameter	6.00"