Product Details
Fast Vacuum Generator MEAC With Blowing Function,Small Size And
Light Weight
1. Introduction and application
- The main material of the vacuum generator is made of alumina,with
strong power; small size, and light weight. It is blown by suitable
for a distributed vacuum supply system under high speed dynamic
compressed air and is working conditions.
- Quick suction-blowing, suitable for HTS series bracket, optional
vacuum switch.
2. Design
- The main material is made of alumina. Contains nozzles,filters, and
silencers;
- Small size and light weight, especially suitable for high-speed
motion conditions;
- It can be directly installed on the vacuum suction cup and
connector;
3. Technical Data
Model | Nozzle diameter | Maximum vacuum | Maximum suction force | air consumption | Operating | Recommended inner diameter of vacuum tube | Operating temperature |
| | | | Inhale | Blow | pressure | Compressed air pipe | vacuum tube | |
| [mm] | [%] | [l/min](1) | [l/min](1) | [l/min](1) | [bar] | [mm](2) | [mm](2) | [ °C] |
MEAC-10 | 1 | 85 | 35 | 47 | 60 | 4…6 | 4 | 4 | 0…50 |
- Note: All flow parameters refer to the parameters under the
conditions of external pressure (ANR) of 101.3 kPa, temperature and
humidity of 20 °C and 65% respectively.
- Note: Compressed air quality: reach ISO 8573-1, 7-4-4 level filter
(40µm) with or without oil.
(1) The working pressure is 4.5 bar.
(2) Hose length: up to 2 m.
4.The suction rate under different vacuum pressure [l/min]
Model | vacuum degree[mbar] |
0 | -50 | -100 | -200 | -300 | -400 | -500 | -600 | -700 | -800 |
MEAC-10 | 35 | 32 | 30 | 27 | 23.5 | 18 | 12 | 8 | 4.5 | 2 |
5.The suction time to reach a specific vacuum pressure in a volume
of 1L
Model | vacuum degree[mbar] |
-50 | -100 | -200 | -300 | -400 | -500 | -600 | -700 | -800 |
MEAC-10 | 0.09 | 0.16 | 0.34 | 0.59 | 0.96 | 1.42 | 2.03 | 3.3 | 7.36 |
6.Design Data
Model | Size[mm] |
B | B1 | B3 | d | D | G1(4) | G4(5) | H | L | L1 | L3 | X1 | Weight[g] |
MEAC-10 | 31 | 34.6 | 15.5 | 7.5 | 27 | G1/8-F | G1/8-F | 21.5 | 46 | 77 | 6 | 28 | 62 |
Note: (4) G1: The compressed air inlet is for suction. Use hose
connectors with straight male threads instead of tapered threads.
(5) G4: The compressed air inlet is for blowing. Use hose
connectors with straight male threads instead of tapered threads.
7.Performance curve of Quick exhaust type vacuum generator MEAC
Company Profile
AMILA focuses on the research and development of vacuum grabbing
products and provides intelligent solutions for automation. With
the progress of intelligent manufacturing and robotics, AMILA is
keeping an eye on subdivision and market. The mission of AMILA is
to provide convenient, high performance, green products and give
life to robots for intelligent mobile solutions.