Light Weight Digital Vacuum Switch MP 30 For Vacuum System Condition Monitoring
Brand Name:AMILA
Model Number:MP30
Minimum Order Quantity:Negotiatable
Delivery Time:Negotiatable
Payment Terms:L/C, T/T
Place of Origin:CHINA
Contact Now
Add to Cart
Active Member
Location:
Suzhou Jiangsu China
Address:
Building 3, No.7 Beiguandu Road, Yuexi Street, Wuzhong District 215104, Suzhou City, Jiangsu Province, China.
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Digital Vacuum Pressure Switch MP 30 Condition Monitoring For Vacuum System
1. Introduction and application
- Condition Monitoring for vacuum system
- Optimize the working cycle, adjust the system loop, and improve the economic benefifit of vacuum system
- For all automated handling areas
2. Design
- Electronic vacuum switch, sturdy polycarbonate case
- Vacuum connection is M5 internal thread
- Built-in LED to show internal state of switch
- Small size, light weight
3. Advantage
- Switching accuracy
- It is easy to use and can meet various needs of users.
- Upper and lower limit values can be displayed on the screen
- Wide range of adaptation
4. Design Data
| Type | Dimensions[mm] | ||||
| B | G1 | H | H1 | L | |
| MP30 | 30 | M5 | 48 | 53 | 25 |
5. Technical Data
| Type | MP 30 |
| Measured medium | Air, non-corrosive, non-flammable |
| Measuring range | -1 bar to 0 bar |
| Max. overpressure | 1.5MPa |
| Repeatability | ±0.2%F.S.±1digit |
| Hysteresis | Adjustable |
| Inputs/outputs | 2 |
| Switching capacity max. [mA] | MAX80mA |
| Indication | Green LED (OUT1:ON lights), red LED (OUT1:ON lights) |
| Display accuracy | ±2% F.S. ±1digit (at ambient temperature: 25 ±3 ) |
| Display unit | kPa,Mpa,kgf/cm2 ,bar,psi,inHg,mmHg,mmH2O |
| Measured-value display | 3% digit LED display (sample rate:5 times/s) |
| Measurement medium connection | F1:R1/8",M5；F2:NPT1/8",M5；F3:G1/8"(BAPP),M5 |
| Voltage | 12to24V DC ±10%, the peak value of continuous wave is less than 10%. |
| Current consumption [mA] | ≤60MA |
| Protection level IP | IP40 |
| Temperature effect | ±2% F. S (in the temperaturerange of 0-50 ) |
| Operating temperature [°C] | Action 0-50 Save-20-60 Waterless and non-icing conditions |
| Weight [G] | About 67g (containing 2 meters of wires) and about 35g (including M8, 4Pin male head) |
Light Weight Digital Vacuum Switch MP 30 For Vacuum System Condition Monitoring
Inquiry Cart
0