Product Details
Vacuum Valve Technology Direct Acting 2/3 Way Vacuum Solenoid Valve
MO
1. Introduction and application
- The valve is usually used for vacuum cutting of feeders, suction
stackers, robots, bag openers and other occasions requiring rapid
reaction between suction and air intake in the circuit, and can
also ensure vacuum connection when power loss or no air pressure
exists.
- As the pressure difference is small, the valve cannot normally
switch the hole position and cannot be used in low vacuum.
2. Design
- The body is made of aluminum alloy.
- Solenoid valve controls piston action.
- When the valve is used normally open, (1) is the vacuum pump
interface, (2) is the pressure relief port, and (3) is the action
port.
- When the valve is used as a normally closed, (1) is the pressure
relief port, (2) is the vacuum pump interface, and (3) is the
action port.
3. Technolody Data
Type | Maximum flow | Minimum vacuum | Maximum vacuum | Excitation reaction time | Degaussing reaction time | Bore diameter | Through hole area | Weight |
[cum/h] | [mbar abs] | [mbar abs] | [msec] | [msec] | [mm] | [mm2 ] | [Kg] |
MO G1/2 NC | 20 | 850 | 0.5 | 30 | 15 | 15 | 176 | 1.53 |
MO G1/2 NO | 20 | 850 | 0.5 | 20 | 18 | 15 | 176 | 1.53 |
MO G3/4 NC | 40 | 850 | 0.5 | 30 | 15 | 20 | 314 | 1.5 |
MO G3/4 NO | 40 | 850 | 0.5 | 20 | 18 | 20 | 314 | 1.5 |
MO G1 NC | 90 | 850 | 0.5 | 38 | 18 | 25 | 490 | 1.91 |
MO G1 NO | 90 | 850 | 0.5 | 25 | 20 | 25 | 490 | 1.91 |
MO G1 1/2 NC | 180 | 850 | 0.5 | 75 | 50 | 40 | 1256 | 5.9 |
MO G1 1/2 NO | 180 | 850 | 0.5 | 70 | 60 | 40 | 1256 | 5.9 |
Direct Acting 2&3-Way Vacuum Solenoid Valve MO.pdf...
Company Profile
AMILA focuses on the research and development of vacuum grabbing
products and provides intelligent solutions for automation. With
the progress of intelligent manufacturing and robotics, AMILA is
keeping an eye on subdivision and market. The mission of AMILA is
to provide convenient, high performance, green products and give
life to robots for intelligent mobile solutions.