Well Drilling Rotary Drilling Tools Pi Steel Tooth Three Cone Bit 311mm Diameter
Brand Name:MIROC by KSQ
Certification:ISO9001 API
Model Number:Tricone Bit
Minimum Order Quantity:1 Piece
Delivery Time:5-15 Working Days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Beijing Beijing China
Address:
Room9-616, No. 10 Zhenxing Road (MDW Plaza), Changping District, 102200 Beijing, China
Supplier`s last login times:
within 28 hours
Product Details
Company Profile
Product Details
API Steel Tooth Rotary Rock Roller Tricone Drill Bit For Well Drilling
Are you troubled by these problems
Replace the drill bit during operation, Cutter lay off or complex geology structure required special drill bit.Great drill bit can help you to solve this problem
1.Excellent wear ability
Famous company cutters, umicore silver solder and saint-gobain high wear material, Good wear resistance enables you to complete the drilling task with one bit
2.High processing precision
The advanced designing and analysis software is the guarantee of precision and reliable of the development
3.OEM
20 years production and development experience make us have ability to resolve the difficult that you meet
Products Parameters:
| Drill Bit Parameters | Application | |
| Tri-cone bits type | 12 1/4" | Soft formations with low compressive strength and high drillability, such as mudstone, gypsum, salt, soft shale, soft limestone, etc. |
| IADC | 127 | |
| WOB(KN/mm) | 0.35-0.9 | |
| RPM(r/min) | 150-70 | Note: the maximum value of WOB and RPM in this table can not be adopted at the same time. |
| API Pin Connection | 6 5/8" API REG | |
1. C-Center jet can avoid bit balling, eliminate fluid area at bottom hole, expedite upward flow of cuttings and improve ROP.
2. Bearing with high saturated nitrile rubber reduces sealing pressure and improves sealing reliability.
3. Full rubber oil storage capsule provides good lubrication for bearing system.
4. G-Gauge protection improve the gauge ability and prolong the service life of the bit.
5. A row of teeth is added between the back taper and the outer row to dress the wellbore and protect the body of the cone.
More Products:
| IADC | WOB KN/mm | RPM r/min | Application |
| 111/114/115 | 0.3-0.75 | 200-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
| 116/117 | 0.35-0.8 | 150-80 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk |
| 121 | 0.3-0.85 | 200-80 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
| 124/125 | 0.3-0.85 | 180-60 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
| 131 | 0.35-0.9 | 180-80 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
| 136/137 | 0.35-1.0 | 120-60 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
| 211/241 | 0.3-0.95 | 180-80 | medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds. |
| 216/217 | 0.4-1.0 | 100-60 | medium formations with high compressive strength, like medium, soft shake, hard gypsum, medium soft limestone, medium soft sandstone, soft formation with harder interbeds. |
| 246/247 | 0.4-1.0 | 80-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
| 321 | 0.4-1.0 | 150-70 | medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble |
| 324 | 0.4-1.0 | 120-50 | medium abrasive formations, like abrasive shale, limestone, sandstone, dolomite, hard gypsum, marble |
| 437/447/435 | 0.35-0.9 | 240-70 | very soft formations with low compressive strength and high drill ability, like clay, mudstone, chalk, gypsum, salt, soft limestone |
| 517/527/515 | 0.35-1.0 | 220-60 | soft formations with low compressive strength and high drill ability, like mudstone, gypsum, salt, soft limestone |
| 537/547/535 | 0.45-1.0 | 220-50 | soft to medium formations with low compressive strength, like medium, soft shake, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds |
| 617/615 | 0.45-1.1 | 200-50 | medium hard formation with high compressive strength, like hard shale, limestone, sandstone, dolomite |
| 637/635 | 0.5-1.1 | 180-40 | hard formation with high compressive strength, like limestone, sandstone, dolomite, hard gypsum, marble |
| Note: Above limits of WOB and RRPM should not be used simultaneously | |||
Company Information:
The MIROC® Rock Drilling Tools product line by KSQ Technologies (Beijing) Co.Ltd. is the result of years of advanced engineering, precision manufacturing, and dedication to the use of high-quality materials.
MIROC® Rock Drilling Tools are used by many drilling professionals related to mining, construction, tunneling, and quarrying projects around the globe.
FAQ
Production cycle: 5-30 days(PDC), 10-60 days(roller cone bit)
Major market: North America,Middle east area,Africa,Europe
Package: Iron or Wooden box Annual output: 10000 pcs
1. Are you trading company or manufacturer ?
We are manufacturer.
2. Whether accept customized according to customers' requirements ?
Yes, We accept customized, no matter what size and type ,and MOQ is 1 piece .
3. About lead time and shipping time?
The lead time depend on quantity of order. Usually it will takes 3-5days shipping to Tianjin Port or Beijing Airport,China .Even the small order or urgent order we can send you by air after received your agreement. According the distance from china to your port, usually from China to European about 25-30 days. To West of American 20-25 days.
4. It is produced according to the standard?
Yes. All our activities are accredited to ISO 9001:2008 and API, both in products and services, at the same time, mature production technology ensuring the quality satisfy international request,we had strictly inspection in the production. Exported to the Middle East, Europe, North America, South America, Australia and other countries and regions.
5. Can I expect a quality product?
Yes. All our activities are accredited to ISO 9001:2008 and API, both in products and services, at the same time, mature production technology ensuring the quality satisfy international request.
6. How do you guarantee your quality?
We select the advanced production technology and equipment, strictly control the whole production process,and we inspected the finished drill bits,we can also make several design changes according to the customer's feedback, and finally ensure the customer's excellent drilling effect.
Well Drilling Rotary Drilling Tools Pi Steel Tooth Three Cone Bit 311mm Diameter
Inquiry Cart
0