

Add to Cart
Ultra-compact pulse digital oximeter, easy to carry finger clip oximeter
Product Description:
Pulse oximeter, based on digital oximeter technology, adopting
advanced DSP algorithm can reduce the influence of motion artifact
and improve the measurement accuracy under weak perfusion
Product features
1. The product is simple and convenient to use.
2. Small in size and light in weight (the total weight including
the battery is about 50g), easy to carry.
3. Low power consumption, two AAA batteries can last for 30 hours.
4. When the battery voltage is too low, which may affect the normal
use, there will be a low voltage warning indication in the visual
window.
5. When no signal is generated, the product will automatically shut
down after 8 seconds.
6. It is suitable for internal and external surgery department,
anesthesiology department, pediatrics, emergency room and other
clinical, as well as oxygen bar, community medical treatment,
family, sports health care (used before and after exercise, not
recommended during exercise) and outdoor activities.
7. No routine maintenance and calibration is required except for
battery replacement.
Technical parameters
1. Display format: LCD display; Pulse intensity: The 16-segment bar
chart shows that the higher the pulse, the stronger the pulse. Low
battery indicator: LCD symbol.
SV alkaline battery, voltage range: 2.7V~ 3.3V, continuous use:
100h.
3. Operating current: <10mA
Description: 4, blood oxygen saturation parameter measuring range:
50% ~ 99% (resolution of 1% 6) accuracy: 75% ~ 99%, + 2% : 50% ~
75%, plus or minus 3%
5. Pulse parameter description measurement range: 30bpm~ 240BOPM
(resolution: 1bpm) accuracy :+2% or z2bpm is taken as a large value
6. Weak perfusion measurement performance: it can show blood oxygen
and pulse value correctly when the pulse filling degree is greater
than 0.6%.
7. Anti-interference ability of natural light: The deviation
between the measured blood oxygen value under indoor natural light
and existing lighting source and the measured value under darkroom
condition is less than ±1%.
8. Anti-artificial light interference ability: It can correctly
measure blood oxygen saturation and pulse value under the test
condition of pulse oximeter.
Usage:
1. Load two AAA batteries according to the positive and negative
signs of the battery compartment and cover the battery cover.
2. Lift the clamp as shown in the picture below. When inserting the
finger, the nail must be up
3. Insert the finger into the rubber hole (it is better to put the
finger into the hole fully), then loosen the clamp.
4. Press the switch button on the front panel.
5, in the process of using your finger had better not shake, the
human body had better not be in motion state.
6. Read relevant data directly from the display screen. When you
turn on the oximeter, each time you press the power switch, the
oximeter will be converted to another display mode. Note: Before
each use of this product, please wipe the nail cover rubber with
medical spray, and wipe the measured finger with medical alcohol
before and after use. (The rubber material is made of medical
rubber, which is non-toxic, harmless and has no allergic side
effects on human skin.)
Storage temperature -20℃~55℃
Ambient humidity Working humidity: 30%~80% Storage humidity:
10%~100%
Atmospheric pressure 1 Range: 70kPa~106kPa range: SOkPa~ 106kPa
Product accessories
Sling 1 AAA battery 2
I Ming $10
One certificate of qualification
Project/Configuration | other products | VeePoo | Performance introduction |
SpO2 | stand by | The level of oxygen in the blood is used to indicate due to heart or lung function. | |
Pulse rate Pr | stand by | The number of heart pulses per minute to indicate overall health or exercise level at any time. | |
Perfusion index Pi | X | stand by | The intensity of blood flow in the finger indicates changes in blood circulation. |
Pulse waveform PW | X | stand by | Dynamic pulse rate graph drawing, updated every second, intuitively and effectively tracking trend changes. |
Heart rate variability index PPI | X | stand by | Reflect and autonomic nervous system activity, balance and related pathological state, etc. |
Bluetooth interconnection | X | stand by | Built-in low-function consumption Bluetooth interconnection module. |
APP support | X | stand by | Wide range of IOS and Android system versions. |
Data cloud storage | X | stand by | Monitoring data can be stored in the cloud or locally. |
Data trends | X | APP display | You can view the monitoring data of each monitoring individually or the trend analysis of continuous monitoring; |
Measurement record | X | stand by | Continuous monitoring for more than 10 seconds, the data is recorded, up to 8 hours of continuous monitoring data can be recorded in a single time; |
Signal sampling | 16-bit | 24-bit | The higher the number of digits, the higher the resolution, the shorter the data delay, and the health index will be reflected in more real time; |
Detection sensor | On the tube | AFE | More comprehensive information and high data accuracy; |
Automatic monitoring | X | stand by | There is no need to press the button to monitor every time, put in your finger to start monitoring, and exit from automatic sleep; |
Application upgrade | X | stand by | Support OTA upgrade, data reuse analysis should be upgraded to create more use value; |