Car Brake Pads 87083010 HS CodeI ATF16949 Quality System With Carbon Based Ceramic

Car Brake Pads 87083010 HS CodeI ATF16949 Quality System With Carbon Based Ceramic

BAIYUN Ceramics Car Brake Pads

BAIYUN Brake Pads are premium replacement pads for any vehicle. They are manufactured with a

positive molding process so they wear evenly and last a very long time. Their back plates come

precision-cut so they will fit perfectly in your brake caliper and produce the least amount of

dust! Another huge benefit of these BAIYUN brake pads is you won't ever have to hear any annoying

squeaks or squeals. They are equipped with custom-made shims that are mechanically attached to

help eleminate any brake noise.

Clean Performance

BAIYUN Brake Pads are one hundred percent asbestos-free and are one of the best in the industry if

you're looking for an ultra-low dust brake pad! The ceramic friction material produces less dust

than metallic pads and will help keep your rims a lot cleaner. They perform great in all different

types of weather conditions and will allow you to have optimal control over your vehicle. To

ensure that they are ready to go right out of the box, they are scorched. This removes any

impurities in the friction compound, which prepares the brake pad for immediate use and provides a

quieter stop with superior stopping power.

Easy Installation

The Performance of BAIYUN Ceramic Brake Pads

Recommended Use: Performance Street Driving, Autocross & Track Events
High Max Operating Temperature with a great bite.
Same compound used for BAIYUN BBK Kits
Improved Pedal Feel And Response
OE Style Anti-Squeal Shims To Manage Noise
Consistent Coefficient Of Friction Thru Temp Range
Scorched To Promote Faster Bed-In
100 Percent Positive Molded For Consistent Feel
Low Noise And Dust/Longer Pad And Rotor Life
Engineered Performance Pad/Direct OE Replacement

High Max Operating Temperature
Improved Pedal Feel And Response
OE Style Anti-Squeal Shims To Manage Noise
Consistent Coefficient Of Friction Thru Temp Range
Scorched To Promote Faster Bed-In
100 Percent Positive Molded For Consistent Feel
Low Noise And Dust/Longer Pad And Rotor Life
Engineered Performance Pad/Direct OE Replacement

Product Description

Advantage of BAIYUN
PROFESSIONAL TEAM: Since 1977, focus on brake over 40 years; Drafting unit of China friction&sealing material industry standard

OEM & ODM: Top 10 of enterprises in friction material industry of China; OEM & ODM quality and service

EXCLUSIVE FORMULA: Safety, Comfortable,Asbestos-free,Wear-resisting,Heat-resisting,Less noise, Less disc injury

CERTIFICATE: ISO9001, ISO/TS16949, E-Mark, Link-Test Report, Greening-Test Report, SGS,MA,CNAS

Friction Material of BAIYUN Ceramics Car Brake Pads

Zhengzhou Baiyun Industrial Co., Ltd.

FAQ

How often do brake lines need to be replaced?
As a general rule of thumb, brake lines should be replaced every 12,000 miles depending on how the

vehicle is driven.
Just to round out this primer on brake lines, here’s one of the other premium brake manufacturer

brands we’ve discussed, when it relates to OEM versus stainless braided brake line replacement:

You can read more on how to replace brake lines within our online help section.
How much does it cost to replace a brake line?
This depends on a couple of things including:
Access to a fully ‘tooled-up’ DIY shop including a lift, or a hydraulic jack. In the latter

case, you'll need to be prepared to do each corner of the car individually, thereby taking more

time for the retrofit.
Cost of a branded set of stainless-braided lines through a reputable aftermarket seller like

sinobrake.com.com.
Time necessary to do the work yourself.
Or failing that, money to pay a brake mechanic to do the work for you.
How many brake lines are in a car?
Two. One ‘hard-line’, typically made of metal, usually found in the engine compartment. And a

second, flexible line attached from the hard-line, to each brake caliper. The second flexible line

is the more critical component since it articulates with the wheel/brake system, and also

represents the primary ‘replaceable’ component when it comes to aftermarket stainless-braided

upgrades.

The View Of Zhengzhou Baiyun Industrail Co., Ltd.

Zhengzhou Baiyun Industrial Co., Ltd., since 1977, is a national high-tech enterprise with main products of brake friction material and brake products. For more than 40 years, Baiyun focus on the R&D, production and selling of brake linings & pads for commercial vehicles and passenger cars, fighting for human traffic braking safety. Till now, Baiyun has become an important supporting supplier and partner of many famous domestic and overseas auto brands. Baiyun has also reached long term strategic cooperation with many famous domestic and overseas auto parts distributors.
Zhengzhou Baiyun Industrial Co., Ltd., is one of the leading auto friction braking enterprise in China, Top 10 enterprises of China Friction Material Industry and member of friction industry association. Baiyun has passed ISO9001 Quality Management System and IATF16949 Auto Industry Quality System Certification. Long-term cooperation is established with international authoritative test organizations such as America LINK and GREEN to test Baiyun brakes regularly. There are more than 1000 models brakes of Baiyun have obtained E-mark certification till now.
Baiyun will insist on the enterprise mission "create value for customers, create happiness for employees" continuously forge ahead, and create a more brilliant future.