Buses Disc Brake Pads 0.35~0.45 Friction Coefficient With OEM / ODM Serivice

Buses Disc Brake Pads 0.35~0.45 Friction Coefficient With OEM / ODM Serivice

I, About Vehicle Brakes

1, Definition of Disc Vehicle Brakes
Automobile brake pad refers to the friction material fixed on the brake drum or brake disc that rotates with the wheel, in which the friction lining and friction lining block bear external pressure and produce friction effect so as to achieve the purpose of vehicle deceleration.
The braking principle is mainly from the friction, using the brake pad and brake disc (drum) and the friction between the tire and the ground, the kinetic energy of the vehicle into the heat after the friction, the car will stop.A good and efficient braking system must be able to provide stable, adequate and controllable braking force, and have good hydraulic transmission and heat dissipation ability, to ensure that the driver from the brake pedal applied force can be fully and effectively transferred to the main pump and sub-pump, and to avoid high heat caused by hydraulic failure and brake recession.There are two major types of brake systems, disc and drum, but apart from the cost advantages, drum brakes are far less efficient than disc brakes.

This thermal energy generates heat, but since the main components are exposed to the atmosphere, this heat can be diffused efficiently. This heat-dissipating property reduces brake fade, which is the phenomenon where braking performance is influenced by the heat. Another advantage of disc brakes is its resistance to water fade, which occurs when the water on the brakes significantly reduces braking force. When the vehicle is in motion, the rotor spins at high speeds and this rotational motion discharges the water from the rotors themselves, resulting in stable braking force.
Disc brakes are generally used in passenger cars, but due to their stable performance at higher speeds and resistance to brake fade, they are gradually spreading into the commercial vehicle segment, where drum brakes were traditionally chosen for their longer service life. There is increasing demand from customers for longer service life and higher quality, and Baiyun is committed to meeting them through further development of the disc brake’s reliability. There are two types of disc brakes.

Commercial Vehicle Brake Pads
Top quality brake pads for light commercial, heavy-duty and off-highway vehicles from one of the world’s leading suppliers of brake parts to the commercial vehicles market.
Cost Down
Extra durability and reduced wear, that means a longer life and lower maintenance costs.
Friction materials targeted to specific applications.
Demonstrated durability under all conditions bringing highly efficient cost-per-kilometre braking.
Latest Technical Advances
BAIYUN constantly invests in new technology for light commercial, heavy-duty and off-highway vehicles, this way, we’re in control of innovation. Our BAIYUN team brings you the latest innovations and advanced options for many of our applications:
BAIYUN – brake pad system developed by BAIYUN ensuring a permanent, welded connection between the spring and the brake pad’s back plate that brings significant advantages by making a secure placement, increasing applied force and reducing idle wear when the brakes are not in use.
Cast-Iron Back plate – a BAIYUN patented technology featuring a lighter back plate than standard that provides better bonding between the back plate and friction material, with less risk of corrosion and improved heat dissipation, leading to superior durability.
Excellent Coverage
Our range for commercial vehicles covers 99% of vehicles on the road, the latest products for the greatest possible coverage. This way, you’re in control of coverage.
Trusted By Vehicle Manufacturers
BAIYUN is factory fitted as standard by many of the world’s manufacturers of vans, trucks, trailers and buses. Our parts are of original equipment quality, bringing added safety and reliability.

Commercial Vehicle Brake Pads
● High temperature, the lowest wear rate, long life
● All the brake linings without noise, 100% asbestos-free
● Durability, strong resistance to the fade and wear
● Lower dust level
● Cost effective and great performance
● The latest formula contributes to the environmental protection
● Braking distance is short, excellent braking performance

3, Brake Performance Of Disc Brake Pads
1). Braking performance: friction coefficient (FF level: 0.35-0.45) braking force: braking force, braking sensitivity
2), wear resistance: wear rate (60,000-100,000km) wear resistance.(with driving habits, road conditions, climate, brake disc material (different models, brake disc material is different, the weight of the car is different)).
3). Comfort: whether there is noise, whether there is a sense of braking, whether it is smooth.
4). Thermal recession: whether it is heat resistant -- the degree of thermal recession.
5). Shear strength: whether it falls off, whether it is easy to break, the density, whether the density is balanced, whether there are bubbles and gaps.
Other items: whether damage brake disc, whether waterproof - water recession degree, whether environmental protection, and brake disc fitting degree.

4, Factors affecting product quality/performance of Disc Brake Pads
1). Formula and materials:
a. What kind of materials are included in the recipe?Is the ratio of various materials in the formula scientific and reasonable?There are dozens of commonly used materials such as: Arron, copper fiber, ceramic fiber, carbon fiber, synthetic graphite, six titanium potassium acid whisker, powder nitrile, antimony sulfide, etc
b. Purity and quality of materials purchased by the company
2). Components:
The quality of the components used, such as the disc brake sheet's steel back and muffler, also affects the performance and quality of the entire brake pad.
3). Processing technology:
a. Control management and protection of materials and components.
b. Pressing effect of pressing process, pressing pressure, whether it is equal ratio pressing, pressing temperature and duration, etc.
c. Whether the heat treatment temperature and time are appropriate, and whether the grinding process is fine and standardized.
d. Procedures such as sandblasting and polishing, adhesive coating, marking and packaging, and control of semi-finished products and finished products

5, Brakes Production process of Disc Brake Pads

1). production process of disc brake pads for passanger cars:
Ingredients stirring + polishing of the steel back -- -- -- -- -- - > glue -- -- -- -- -- - > pressure molding - -- -- -- -- -- -- -- -- -- -- - > > heat treatment friction surface grinding, chamfering, slot -- -- -- -- -- - > spray painting -- -- -- -- -- - > the silencing pills -- -- -- -- -- - > surface coated -- -- -- -- -- > spring, three jaw -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- - > artificial packing packaging
2). production process of disc brake pads for commercial vehicles:
Ingredients stirring + polishing of the steel back -- -- -- -- -- - > glue -- -- -- -- -- - > pressure molding - -- -- -- -- -- -- -- -- -- -- - > > heat treatment friction surface grinding, chamfering, slot -- -- -- -- -- - > spray painting -- -- -- -- -- - > laser marking loading -- -- -- -- -- - > spring -- -- -- -- -- - > thermoplastic packing -- -- -- -- -- - > artificial packing packaging

II, About BAIYUN

Zhengzhou Baiyun Machinery Co., Ltd.

Zhengzhou Baiyun Industrial Co., Ltd., since 1977, is a national high-tech enterprise with main products of brake friction material and brake products. For more than 40 years, Baiyun focus on the R&D, production and selling of brake linings & pads for commercial vehicles and passenger cars, fighting for human traffic braking safety. Till now, Baiyun has become an important supporting supplier and partner of many famous domestic and overseas auto brands. Baiyun has also reached long term strategic cooperation with many famous domestic and overseas auto parts distributors.

Zhengzhou Baiyun Industrial Co., Ltd., is one of the leading auto friction braking enterprise in China, Top 10 enterprises of China Friction Material Industry and member of friction industry association. Baiyun has passed ISO9001 Quality Management System and IATF16949 Auto Industry Quality System Certification. Long-term cooperation is established with international authoritative test organizations such as America LINK and GREEN to test Baiyun brakes regularly. There are more than 1000 models brakes of Baiyun have obtained E-mark certification till now.

Baiyun will insist on the enterprise mission “create value for customers, create happiness for employees” continuously forge ahead, and create a more brilliant future

WHY CHOOSE BAIYUN

Advantage of Baiyun Brakes

1). Excellent formula. Various formulas are suitable for different models and road conditions
2). Equipped with commercial vehicle bench test bench and passenger vehicle bench test bench, 1:1 simulated real brake friction performance test, each formula and product for strict testing.
3). Automatic large scale batching system with accurate matching.Ensure uniform quality of ingredients.
4), the equal ratio press presses, presses the finished product density unification, the quality is consistent.
5), automatic unmanned operation press, automatic packing and steel back, automatic flattening, automatic pressing, eliminate the error rate of manual operation, to ensure the quality of finished products.

III, About The Disc Vehicles Brake Of Baiyun

1, Disc Brakes of Commercial Vehicles

1. High quality raw materials
2. Good heat dissipation
3. Do not damage the drum
4. Low noise
5. Good friction coefficient.
6. High temperature resistant
7. Environment-friendly
8. High Perfomance
9. Reasonable price,good quality .
10. More than 1000+ specifications
11. Super wear-resistant
12. Low density, low weight

2, Disc Brakes of Passenger Cars

Characteristic
1. High quality raw materials
2. Good heat dissipation
3. Do not damage the drum
4. Low noise
5. Good friction coefficient.
6. High temperature resistant
7. Environment-friendly
8. High Perfomance
9. Reasonable price,good quality .
10. More than 1000+ specifications
11. Super wear-resistant
12. Low density, low weight

Friction Materials of BAIYUN Disc Brake Pads

1, Friction Raw Material

2,Types of friction materials

*1 Sintered alloy: The phenomena where the particles of powder material join together and turns into a solid substance by pressurizing and fabricating the powder material and heating it at temperatures below the melting point. Material that is not made by melting metal, but instead by sintering metal powders is called sintered alloy.
*2 C/C composite: Carbon fiber reinforced carbon composite. Carbon composite material has been strengthened with carbon fiber. It is extremely thermally stable and lightweight. This material is often used for brake rotors and brake pads for aircraft and racing cars.

3, Friction Material of Baiyun


4, Manufacturing process of friction materials

FAQ

Q1. What is your terms of packing?

A: Paper Carton

Q2. What is your terms of payment?

A: T/T or L/C, D/A

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF,FCA, CPT, CIP, DDU.

Q4. How about your delivery time?

A: Generally, 30days

Q5. Can you produce according to the samples?

A: Yes, of course

Q6. What is your sample policy?

A: We can supply the sample for free,but the customers have to pay the courier cost.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

Zhengzhou Baiyun Industrial Co., Ltd., since 1977, is a national high-tech enterprise with main products of brake friction material and brake products. For more than 40 years, Baiyun focus on the R&D, production and selling of brake linings & pads for commercial vehicles and passenger cars, fighting for human traffic braking safety. Till now, Baiyun has become an important supporting supplier and partner of many famous domestic and overseas auto brands. Baiyun has also reached long term strategic cooperation with many famous domestic and overseas auto parts distributors.
Zhengzhou Baiyun Industrial Co., Ltd., is one of the leading auto friction braking enterprise in China, Top 10 enterprises of China Friction Material Industry and member of friction industry association. Baiyun has passed ISO9001 Quality Management System and IATF16949 Auto Industry Quality System Certification. Long-term cooperation is established with international authoritative test organizations such as America LINK and GREEN to test Baiyun brakes regularly. There are more than 1000 models brakes of Baiyun have obtained E-mark certification till now.
Baiyun will insist on the enterprise mission "create value for customers, create happiness for employees" continuously forge ahead, and create a more brilliant future.