Aluminum Corner Radius End Mill / CNC Milling Cutter For Aluminum
Brand Name:KTC
Certification:CCC
Model Number:A380CR
Minimum Order Quantity:10 pcs
Delivery Time:1-35days
Payment Terms:T/T, L/C,Paypal...
Contact Now
Add to Cart
Verified Supplier
Location:
Changzhou Jiangsu
Address:
Xixiashu Industrial Zone,Xinbei District,Changzhou City,Jiangsu Province,China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Aluminum Corner Radius End Mill / CNC Milling Cutter For Aluminum
Specifications:
A380CR high gloss aluminum milling cutter series adopt domestic
high-quality fine grain tungsten steel material, flexural strength:
4100mpa, grain size: 0.8 μm, not easy to break the edge. A new
special aluminum milling cutter with color coating is introduced,
which increases the wear resistance of the cutter. The unique
groove design and the polishing treatment of the front cutting edge
and groove are adopted to increase the cutting performance. It is
especially suitable for efficient and high gloss machining of
aluminum alloy (6 and 7 series aluminum) materials.
| Raw Material | K30 / YL10.2 |
| TRS | >4100N/mm2 |
| Hardness | >91HRA |
| A.O.L | 50mm-150mm |
| Grain size | 0.8 μm |
| Upto | HRC50 |
| Flutes No | 3F |
| Suitable for | Aluminum,plastic and other materials |
Standard Sizes
| Size | Flute Length of End Mills(mm) |
| Aluminum Use | |
| D1*D4*50 | 3 |
| D1.5*D4*50 | 4 |
| D2*D4*50 | 5 |
| D2.5*D4*50 | 6 |
| D3*D4*50 | 8 |
| D3*D3*50 | 8 |
| D3.5*D4*50 | 9 |
| D4*D4*50 | 10 |
| D1*D6*50 | 3 |
| D1.5*D6*50 | 4 |
| D2*D6*50 | 5 |
| D2.5*D6*50 | 6 |
| D3*D6*50 | 8 |
| D3.5*D6*50 | 9 |
| D4*D6*50 | 10 |
| D6*D6*50 | 13 |
| D6*D6*50 | 15 |
| D7*D8*60 | 17 |
| D8*D8*60 | 20 |
| D10*75 | 25 |
| D12*75 | 30 |
| D14*100 | 35 |
| D16*100 | 40 |
| D18*100 | 40 |
| D20*100 | 40 |
| |
| D3*D4*75 | 12 |
| D4*D4*75 | 14 |
| D5*D6*75 | 15 |
| D6*D6*75 | 20 |
| D8*75 | 25 |
| D3*D4*100 | 15 |
| D4*D4*100 | 15 |
| D5*D6*100 | 20 |
| D6*D6*100 | 25 |
| D8*D8*100 | 30 |
| D10*100 | 30 |
| D12*100 | 35 |
| D6*D6*150 | 40 |
| D8*D8*150 | 45 |
| D10*150 | 50 |
| D12*150 | 55 |
| D14*150 | 60 |
| D16*150 | 65 |
| D18*150 | 70 |
| D20*150 | 70 |
Parameter
Cutter Diameter
The cutter diameter is often the first thing machinists look for
when choosing a tool for their job. This dimension refers to the
diameter of the theoretical circle formed by the cutting edges as
the tool rotates.
cutter diameter
Shank Diameter
The shank diameter is the width of the shank – the non-cutting end
of the tool that is held by the tool holder. This measurement is
important to note when choosing a tool to ensure that the shank is
the correct size for the holder being used. Shank diameters require
tight tolerances and concentricity in order to fit properly into
any holder.
Overall Length (OAL) & Length of Cut (LOC)
Overall length is easy to decipher, as it is simply the measurement
between the two axial ends of the tool. This differs from the
length of cut (LOC), which is a measurement of the functional
cutting depth in the axial direction and does not include other
parts of the tool, such as its shank.
Overall Reach/Length Below Shank (LBS)
An end mill’s overall reach, or length below shank (LBS), is a
dimension that describes the necked length of reached tools. It is
measured from the start of the necked portion to the bottom of the
cutting end of the tool. The neck relief allows space for chip
evacuation and prevents the shank from rubbing in deep-pocket
milling applications. This is illustrated in the photo below of a
tool with a reduced neck.
Aluminum Corner Radius End Mill / CNC Milling Cutter For Aluminum
Inquiry Cart
0