Activated Carbon Filter Dust Mask Gray Color Reducing Heat /
Moisture Accumulation
1 . Descriptions
Our N95 FFP1 particulate respiratormade in non-woven fabric
allowing smooth breathing, reducing heat and moisture accumulation.
A comfortable elastic loops with no pressure to the ears, one size
FFP1 mask fits most faces.
Filters non-toxic dust, pollen, dander, sawdust, garage dust,
garden and general household dust and irritants. They're so light
and breathable that they can easily be doubled up for extra
protection.
Adjustable nose clip helps provide a secure seal to prevent
polluted air from entering. Cushioning foam for added comfort on
the nose.
This anti-dust mask is ideal for both women and men, suitable for
cycling, camping, running,travel,climbing and daily use.
2 . Feature
1.The disposable particulate respirator is designed to help provide
quality, reliable respiratory protection for the professional.
2.Advanced electrostatically charged microfibers which make
breathing easier and cooler.
3.The proprietary Exhalation Valve reduces heat build-up inside the
respirator to help keep the wearer more comfortable.
4.The soft inner material provides added comfort while the soft
nose foam and adjustable nose clip help provide a custom fit.
5.These features are designed to enhance user comfort and help
increase wear ability.
3 . Certification
This product has been tested according to the following European
Standard:
EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.
It complies with European Regulation (EU) 2016/425 on Personal
Protective Equipment (PPE).Category III.
EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in Annex VII
under surveillance of BSI , notified body n°0086.
4 . How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
5 . Discard and replace the mask if:
- The mask is removed whilst in the contaminated area.
- Clogging of the respirator causes breathing difficulties.
- The mask becomes damaged.
- For respirators protecting against vapours,the smell of vapours
present becomes derectable.